Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

ZA Puller and Uni system

Welcome Guest, Log in or Register
Author 
Erik Sagness

12-13-2000 18:15:12




Report to Moderator

Was woundering if anybody out there has tried to pull a ZA MM is it worth it to do anything like this or just to keep it a show tractor? I have the abbility to bore it out to almost 3.745 inches. Just looking for some input on this subject. Like MM's alot. I am into collecting the Uni system have almost the entire line up including the side valve V4 and overhead valve V4 both of them are 206 cubic inches. Always looking for parts. Thank you for your time Erik.
Western Wisconsin

[Log in to Reply]   [No Email]
S.W.MO

12-14-2000 15:40:53




Report to Moderator
 Re: ZA Puller and Uni system in reply to Erik Sagness, 12-13-2000 18:15:12  
I pull a ZA in some local pulls
But can't get it down to 3500 & it's not
enough tractor to compete at 4500.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy