Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Minneapolis Moline Jetstar 3 Super

Welcome Guest, Log in or Register
Author 
Jack Schlosser

11-10-2000 10:01:04




Report to Moderator

I need the factory shop manual pages showing the pto clutch and shaft, along with the assembly and setup instructions. Any help would be appreciated. Also can the pto clutch friction plates be relined if worn, or do they have to be replaced? If you have the shop manual pages available, my fax # is 413-812-5195.
Thanks, Jack




[Log in to Reply]   [No Email]
Peter

11-13-2000 12:08:30




Report to Moderator
 Re: Minneapolis Moline Jetstar 3 Super in reply to Jack Schlosser, 11-10-2000 10:01:04  
Clutch disc will have to be replaced. I dont know of any companys relining them. Give Deurs a try they might have the parts or a book at 231-924-3420



[Log in to Reply]  [No Email]
Steve Rogers

11-11-2000 17:22:12




Report to Moderator
 Re: Minneapolis Moline Jetstar 3 Super in reply to Jack Schlosser, 11-10-2000 10:01:04  
We just found this site for the first time while looking to help out my father-in-law. He has a MM Jetstar 3 that is the brown color. It runs and he has been using it to mow with a rotory chopper etc. It is nothing to look at paint wise and the seat is bad. He is wanting to sell it and knows a guy that wants to buy it but has no idea of the value to set a price. Would you be willing to give us a ballpark figure on this tractor since you have a jetstar?

[Log in to Reply]  [No Email]
Jack Schlosser

11-13-2000 04:22:38




Report to Moderator
 Re: Re: Minneapolis Moline Jetstar 3 Super in reply to Steve Rogers, 11-11-2000 17:22:12  
Steve,

I have seen Jetstar 3's advertised in the 3000-6000 price range recently. Mechanical condition,
tires, and sheet metal / paint condition would determine where in this range it might fall. Any tractor in good mechanical shape available for less, I would consider a bargain.

Jack



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy