Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

G bull gears

Welcome Guest, Log in or Register
Author 
craney

03-06-2008 09:39:07




Report to Moderator

Just a question for you guys....I am replacing the bull gears in my G transmission and the replacements I got have the number 10A1927. The old gears had 10A1928. Is there any difference between the two? Or is it just a newer part number change but the same gears? There is the same number of teeth on both gears. Thanks!




[Log in to Reply]   [No Email]
craney

03-07-2008 05:03:04




Report to Moderator
 Re: G bull gears in reply to craney, 03-06-2008 09:39:07  
Thanks, P Luna...upon further investigation, I can see where they used a grinder and ground out the 8 and the stamped in the 7. Must be one in the same gear! Thanks again!



[Log in to Reply]  [No Email]
P Luna

03-07-2008 00:16:55




Report to Moderator
 Re: G bull gears in reply to craney, 03-06-2008 09:39:07  
The service parts list No.R-1108A for the GTB >C shows part #10A1927 to be correct part number.Shows both gears are the same left and right.Hope this helps P.Luna



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy