Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

Moline Cylinder heads

Welcome Guest, Log in or Register
Author 
J.A.W.

12-01-2007 20:40:54




Report to Moderator

Hi there guys. I have noticed some of you talking cylinder heads on here. I'm sure all of you know more than I do. I had a UB that I took apart a while back. It had some different heads on it. The tractor seemed to run quite strong. The casting number was ground off and there was some numbers stamped on them. Not sure what they were. For some unknown reason I sold them. The heads were square intake and round exhaust. The chambers were quite shallow but wide. Most high compression heads I have seen the chambers are closed off and deep. Can someone tell me what style or number of heads are made this way??? Thanks

[Log in to Reply]   [No Email]
Dieselbear

12-02-2007 05:19:01




Report to Moderator
 Re: Moline Cylinder heads in reply to J.A.W., 12-01-2007 20:40:54  
They sound like 42/30,31,32,or 33 heads. with 30's being the least and 33's being the most compression. They were on the late 670's up thur the G1000 tractors Glenn



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy