Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

Minneapolis-Moline Tractor M602

Welcome Guest, Log in or Register
Author 
David Pruitt

05-27-2007 19:11:36




Report to Moderator

I have a M602 and I believe it may have the incorrect size rear tire. Can anyone tell me what is the factory recommended tire size for the M602 Diesel? Thank you. David




[Log in to Reply]   [No Email]
schrocky

05-28-2007 04:14:30




Report to Moderator
 Re: Minneapolis-Moline Tractor M602 in reply to David Pruitt, 05-27-2007 19:11:36  
There are 7 M602 and 604 tractors here and this is what I see 3 have 18.4x34, 2 have 15.5x38, 1 has 18.4x30 and 1 has 18.4x38. My book shows all these except 18.4x38 as avail from factory. The 18.4x38 make the tractor go fast in 5th gear ! like about 26-27mph. He plows in 1st hi about 3 1/2 to 4 mph radials and rides nice ...thinking about doing it to mine



[Log in to Reply]  [No Email]
shinnery

05-28-2007 22:48:00




Report to Moderator
 Re: Minneapolis-Moline Tractor M602 in reply to schrocky, 05-28-2007 04:14:30  
How many of these have power adjust wheels? I have a M602-LP as a parts tractor for my M670-LP and both of them have the power adjust wheels with 15.5x38s. The engine in the M602 is stuck hard and I have been wondering about putting a Chrysler Industrial 440 (ex-Irrigation engine) in the frame, just not sure how to bolt the MM tranny to the 440.
Bryce



[Log in to Reply]  [No Email]
schrocky

05-29-2007 14:51:22




Report to Moderator
 Re: Minneapolis-Moline Tractor M602 in reply to shinnery, 05-28-2007 22:48:00  
None of them are but we have an M5 with 15.5x38 powershift wheels



[Log in to Reply]  [No Email]
Dieselbear

05-28-2007 03:02:19




Report to Moderator
 Re: Minneapolis-Moline Tractor M602 in reply to David Pruitt, 05-27-2007 19:11:36  
Mine has 18.4/34's



[Log in to Reply]  [No Email]
herald

05-27-2007 21:02:57




Report to Moderator
 Re: Minneapolis-Moline Tractor M602 in reply to David Pruitt, 05-27-2007 19:11:36  
David, Mine has 15.5x38 on it.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy