Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

Working on a UTU

Welcome Guest, Log in or Register
Author 
poor Rich in Ne

05-13-2006 19:00:33




Report to Moderator

My Son want to pull a Minnie so we got his grandpa's old U out and started workin on it. Hasn't run in years but we finnaly got it going. We have to put on some new radiator hoses and Misc. We had to take the valve covers off to get the push rods unstuck and the inside is real gunky. What is the best way to clean the inside the engine without having to tear it down. Engine sounds good and ran fine when it was last used several years ago. He has pulled with the Z, but wants somthing bigger. I think I have created a monster???
thanks for any help.
"poor" Rich in Nebr

[Log in to Reply]   [No Email]
nebsteve

05-16-2006 18:50:53




Report to Moderator
 Re: Working on a UTU in reply to poor Rich in Nebr, 05-13-2006 19:00:33  
well there are several things half 30 weight half fuel oil is 1

ford type f transmission fluid is 2

and 3 and most likely the best is 2 cans of stp and the rest 15w40 and drive use it.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy