TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum

carburetor

Welcome Guest, Log in or Register

Author

tom morstorf

11-28-2005 14:19:36

Report to Moderator

Hi I have been looking all over the place for a marvel carb. tsx663 as my minn.445 will not run with out it Or trying to find a nozzle main as I made a bad mistake in trying to take it out oop. As I need some help trying to find other one.And any help would be nice thank

[Log in to Reply] [No Email]

dmw

11-29-2005 18:02:53

Report to Moderator

Re: carburetor in reply to tom morstorf, 11-28-2005 14:19:36

Try treadwell carb. co. 607-829-8321

[Log in to Reply] [No Email]

tom morstorf

11-29-2005 17:29:23

Report to Moderator

Re: carburetor in reply to tom morstorf, 11-28-2005 14:19:36

Thank you everyone and yes it was a 633 carb. I did find a used tube at place in Lawrence Ks. call Shuck Impl.co. carry new and used parts. Thanks again

[Log in to Reply] [No Email]

Glen in TX

11-29-2005 14:29:49

Report to Moderator

Re: carburetor in reply to tom morstorf, 11-28-2005 14:19:36

Marvel Schebler / Zenith catalog shows the 445 used a TSX-633, TSX-713, or TSX-797 and all used the same K7515 kit. All were also replaced with a newer Zenith 014991 carb that is still available new. For the TSX-633 the adjustable needle for jet is available yet but not the main nozzle. Just have to find someone that has a new old stock or used one.

[Log in to Reply] [No Email]

J Wuertz

11-29-2005 08:05:42

Report to Moderator

Re: carburetor in reply to tom morstorf, 11-28-2005 14:19:36

Try these people,

Motec Engineering
7342 W State Road 28
Tipton, IN 46072
Phone: 765-963-6628
Matt is a great guy that knows his stuff. He can help you with: Carburetors, Governors.

[Log in to Reply] [No Email]

old

11-28-2005 19:25:51

Report to Moderator

Re: carburetor in reply to tom morstorf, 11-28-2005 14:19:36

You sure thats a 663 or is it a 633. My catalog says a MM-445 uses a TSX633. Value bilt has rebuilt and new ones by the way.

[Log in to Reply] [No Email]

Kelvin

11-28-2005 18:30:39

Report to Moderator

Re: carburetor in reply to tom morstorf, 11-28-2005 14:19:36

Here's some ideas:

1. If you got the nozzle out, Call Robert's Carburetor Repair and get a nozzle for A John Deere 40 or 420 carburetor. They have a website, but I don't have the ip address.

2. Call these guys and see if anyone has a carb: Welters 417-498-6496, Everetts 740-922-3335, Baucom 1-800-658-2309 (prices a bit high).

3. If you can come up with a Tsx97 from a Z, ZA or ZB, you can use it if you install your old throttle shaft. The old fuel line will probably not work, though as the inlet is on the size and your carb fuel inlet is on the back.

[Log in to Reply] [No Email]

Edd P

11-28-2005 21:27:10

Report to Moderator

Re: carburetor in reply to Kelvin, 11-28-2005 18:30:39

Don't waster your time with Roberts. The are the most overpriced people out there.

[Log in to Reply] [No Email]

Kelvin

11-29-2005 09:05:41

Report to Moderator

Re: carburetor in reply to Edd P, 11-28-2005 21:27:10

If you know another source for a nozzle, please share it with us.

I checked with a Deere dealer a few years ago and he said he could not get a nozzle.

[Log in to Reply] [No Email]

Edd P

11-30-2005 05:01:21

Report to Moderator

Re: carburetor in reply to Kelvin, 11-29-2005 09:05:41

News flash:
There are plenty of places to get carburetor parts other than the Deere mothership and Roberts. Same parts, half the price. Look at the other places mention in this subject.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy