Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

Nos parts found need id.

Welcome Guest, Log in or Register
Author 
Larry from MD

09-06-2005 15:11:27




Report to Moderator

I found some old parts my father put away in the 70's.They were supposed to be moline,or new idea.I have an engine bearing with numbers m400, lower115938, GM.020 under.I have some valves the only mark is gm eaton.There is lots more stuff if thease look like moline i will dig out the rest.




[Log in to Reply]   [No Email]
george md

09-06-2005 17:46:12




Report to Moderator
 Re: Nos parts found need id. in reply to Larry from MD, 09-06-2005 15:11:27  
Larry,

My cross references show the GM #"s as having

7 digits.

george



[Log in to Reply]  [No Email]
Dieselbear

09-07-2005 08:51:49




Report to Moderator
 Re: Nos parts found need id. in reply to george md, 09-06-2005 17:46:12  
It's nice to see others in Md that have Molines, I was begining to think I was the only one! Sorry , can't help with the bearing numbers. Glenn



[Log in to Reply]  [No Email]
jeffj

09-08-2005 05:52:53




Report to Moderator
 Re: Nos parts found need id. in reply to Dieselbear, 09-07-2005 08:51:49  
Don`t think you are the only one. There are a few of us in Maryland. I live in Rising Sun



[Log in to Reply]  [No Email]
Larry from MD

09-07-2005 09:20:39




Report to Moderator
 Re: Nos parts found need id. in reply to Dieselbear, 09-07-2005 08:51:49  
I think i made a big mistake after a long weekend.looking at the stuff today i think its mostly GM 2 cycle engine parts.The cabinet has the middle shelf broken and laying on the bottem one.Alot of stuf has gotten mixed.



[Log in to Reply]  [No Email]
David Benes

09-07-2005 19:00:14




Report to Moderator
 Re: Nos parts found need id. in reply to Larry from MD, 09-07-2005 09:20:39  
Alot of the MM part numbers started with "10A". Hope this helps.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy