Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

G-1000 Hydraulic system

Welcome Guest, Log in or Register
Author 
mike price

02-10-2005 16:22:34




Report to Moderator

I want to put a backhoe on. how much output does the pump have?




[Log in to Reply]   [No Email]
F M-M

02-10-2005 19:25:22




Report to Moderator
 Re: G-1000 Hydraulic system in reply to mike price, 02-10-2005 16:22:34  
I'm not sure of the GPM but if you have a later one with the closed center system using the Vickers pump, they put out a good supply for most jobs. The old gear pumps on early G-1000s and early Vista's were quite slow. When running our 10" auger with a hydaulic orbit motor driven drag, the closed systems will run the auger twice as fast and seem to have more pressure too and more power. Just my experience. I looked up the gpm on the old gear pumps and it is 15 at 1800 on a vista. Don't know the newer ones.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy