TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum

info about a JT twin city moline

Welcome Guest, Log in or Register

Author

greg s in tx

12-31-2004 14:59:23

Report to Moderator

hello, i have just purchased an old twin city JT tractor. i have not found ANY information or discussion about it. does anybody out there have any info about these? i sure would like to find a manual for it and a source of parts somewhere. got to be one of these sitting around in a junk yard somewhere???

greg s in tx

[Log in to Reply] [No Email]

Don L.

01-04-2005 15:14:22

Report to Moderator

Re: info about a JT twin city moline in reply to greg s in tx, 12-31-2004 14:59:23

I can buy a parts tractor that looks to have a good manifold and part it out, if I can sell enough parts off,it I will buy it.
Don L.
Austin Mn

[Log in to Reply] [No Email]

greg s in tx

01-04-2005 20:07:47

Report to Moderator

Re: info about a JT twin city moline in reply to Don L., 01-04-2005 15:14:22

does it have a decent set of fenders?

[Log in to Reply] [No Email]

Don Livingston

01-08-2005 12:41:02

Report to Moderator

Re: info about a JT twin city moline in reply to greg s in tx, 01-04-2005 20:07:47

I don't think it it has fenders at all. New skiins are available.
Don L.

[Log in to Reply] [No Email]

Kelvin

12-31-2004 18:32:00

Report to Moderator

Re: info about a JT twin city moline in reply to greg s in tx, 12-31-2004 14:59:23

I have a JTU with original Waukesha engine. If your tractor has the oil filter on the left side above the water pump it has the waukesha engine. If the oil filter is underneath, it has been changed to a Z or ZA engine, which was a popular thing to do.

If you have the Waukesha engine:

The oil filter is same as for a MM R, Z, ZB.

I was told that the pistons use the same rings as the R and Z. I haven't had mine apart so I haven't confirmed this.

Exhaust manifolds that are useable are tough to find. George Miller (website at gmmachine.com)put mine back together. I used Chevy exhaust manifold gaskets, because I couldn't find the right manifold gaskets locally.

The transmission is pretty much same as the MM Z, (The Z transmission was about 6" longer) but some clutch parts are different.

Brake parts should be same as the MM Z.

I'm told that Charlie Doty in Princeton IL is the man to talk to about these early molines. Sorry, I don't have his phone number.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy