Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

445 engine overhaul parts

Welcome Guest, Log in or Register
Author 
Gary

06-21-2004 12:50:42




Report to Moderator

i have a 445 that ran out of oil and siezed. i have a new block and crank and am wanting to reuse my pistons and rods. where is a good place to look for parts, such as rings, rod and main bearings, gaskets, etc.




[Log in to Reply]   [No Email]
Kelvin

06-21-2004 18:53:49




Report to Moderator
 Re: 445 engine overhaul parts in reply to Gary, 06-21-2004 12:50:42  
several ways to go:
Napa can probably get everything for you, if they're willing to call the "factory". (They have what i think is a pretty good gasket set, too.)
You can call a MM parts supplier:
Everetts: 740-922-3335
Welter's: 417-498-6496
Baucom: 1-800-658-2309
Also, Value Built will have almost all the parts you mentioned.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy