Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

ZAS UTS GB spline axles

Welcome Guest, Log in or Register
Author 
Mopower

04-16-2004 05:16:10




Report to Moderator

Does anyone know the O.D. of these splined axles? How many splines are on them? I know a RTI and RTU have the same O.D. Help! Trying to see about other brand hubs to fit the splines. Thanks!




[Log in to Reply]   [No Email]
Andy

04-16-2004 14:26:34




Report to Moderator
 Re: ZAS UTS GB spline axles in reply to Mopower, 04-16-2004 05:16:10  
ZAS is 2.5" 6 spline. We had a wore out hub and had planned on boring it out and welding in a piece of spline stock. We couldn't find anyone who had 2.5" 6 spline,(lots of finer splines available). We lucked out and found a good ZAS hub. I couldn't measure U and GB because of the big nut. I beleave a U is 3" and GB 3.25" You can cut splines with a broaching tool but not too many shops have them.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy