Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Minneapolis Moline Tractors Discussion Forum
:

Procuring Paint

Welcome Guest, Log in or Register
Author 
Spuds

02-22-2004 13:51:32




Report to Moderator

Where do you get MM gold and red Paint.
Thanks Spuds




[Log in to Reply]   [No Email]
Oklahomatractorrebuilder

02-22-2004 20:56:52




Report to Moderator
 Re: Procuring Paint in reply to Spuds, 02-22-2004 13:51:32  
I use Van Sickle paint with hardner added. The MM gold and red are special order but are available anywhere that sells the Van Sickle paint. We get ours here at Atwoods. It keeps the shine for years as long as you add the hardner. Tim



[Log in to Reply]  [No Email]
Phil S.

02-22-2004 14:47:18




Report to Moderator
 Re: Procuring Paint in reply to Spuds, 02-22-2004 13:51:32  
About anywhere.. Any place that can mix paint can mix up the colors. A body shop that mixes their own paint. Some NAPA auto parts stores carry Martin-Senour paints. You can get straight enamals from AGCO equipment dealers. Color may vary between cans..so be careful if you need more than a gallon.

Tractor Supply used to carry the MM Gold in an enamal. Be careful here too. Paint tint can vary between two cans. The paint was kind of "orangish-gold". I painted a ZAU with it as an experiment. I mixed some hardner in and thinned it with naptha. It sprayed on nice.

Overall it came out okay, but the shade is a bit different than my other two MM's that I painted with Dupont Centari paint. Use the Dupont Delux code and cross it over to the Centari paint.

Anyway, here is a listing of paint codes:

RED:

1. M-M Implement Red Part # JT9060 (Original Color)
2. Martin-Senour Synthol Cherry Red # 90G540
3. Martin-Senour Acrylic Enamel Cherry Red # 99G540

YELLOW:

1. M-M # 15P1015 - Yellow Gloss Enamel (Original Color)
2. White Farm Equip. - Enamel - M-M Industrial Yellow #20-7002235
3. Martin Senour-Acrylic Enamel Federal Yellow # MSE 036A (M-M Industrial Yellow)
4. Dupont Centrai-Penske Yellow - Penske Leasing Co. # K9590AK
(M-M Industrial Yellow)
5. Sherwin-Williams Industrial Yellow # JK 9056

PRAIRIE GOLD:

1. Dupont-Dulux Enamel #006DH Gold (Early - Original Color, used
approximately 2 years).
2. P.P.G. - Acrylic Enamel # DAR 60098X (Early Gold)
3. P.P.G. - Acrylic Enamel # DAR 60039 (Prairie Gold #2)
4. Dupont-Dulux - Enamel # 020DH Orange (Late Prairie Gold)
5. AG-One-WFE Prairie Gold Enamel (old # 209002234,
new #79014808)
6. AG-One-White-New Idea M-M Prairie Gold (spray can)
(old # 20-7002250, new #79014834)
7. Martin-Senour Prairie Gold - Synthol Enamel # 90T3749
8. Martin-Senour Prairie Gold - Acrylic # 99L3749
9. Central Tractor Farm & Family - M-M Gold Enamel # 9432-060

BROWNS:

1. M-M Dyna Brown Enamel # 15P919 (10R1346) Original Color
2. M-M Metallic Brown - Enamel # 15P814 (Original Color)
3. P.P.G. - Acrylic Lacquer # D D L 230049 (Dyna Brown)
4. Sherwin Williams - Dyna Brown # 33-31322-G
6. Dupont Acrylic Enamel # C8194AH (Metallic Brown)

GRAY:

1. M-M # JT 9057 Twin City Gray (Original Color)
2. Rust-Oleum Waukesha Gray # 724
3. P.P.G. Acrylic Enamel (T-C Gray) # DAR 31953

[Log in to Reply]  [No Email]
Harold

02-22-2004 18:23:15




Report to Moderator
 Re: Re: Procuring Paint in reply to Phil S., 02-22-2004 14:47:18  
Phil,
How do you know what shade of Prairie Gold to use?
I have a UBSpecial and an M5...they are two different shades of Praire Gold. How do I know which shade to use on each?
I'm glad I read your comments, otherwise I probably would have just used AGCO on both of them. Harold



[Log in to Reply]  [No Email]
Phil S.

02-24-2004 16:28:46




Report to Moderator
 Re: Re: Re: Procuring Paint in reply to Harold, 02-22-2004 18:23:15  
Harold,

You don't. That is the problem.. At least the tractors made in the mid 40's the color could vary. A story I read in one of the MM books mentioned that MM mixed their paint on a batch per batch basis. Therefore, tractors that came off the line on the same day could be two different shades.

I do know that later MM tractor had a different shade of prarie gold than earlier ones. In your case. I think that Prarie Gold #2 would be the proper color.

As for the "shade". Like I said.. That can vary from tractor to tractor. There is even great debate on what is the proper "Red" color. Use the color that you think is the best match for your machine.

Phil


Phil

[Log in to Reply]  [No Email]
Harold

02-24-2004 19:13:36




Report to Moderator
 Re: Re: Re: Re: Procuring Paint in reply to Phil S., 02-24-2004 16:28:46  
Phil. Thanks for the info. Harold



[Log in to Reply]  [No Email]
Potter

02-22-2004 14:40:43




Report to Moderator
 Re: Procuring Paint in reply to Spuds, 02-22-2004 13:51:32  
I allways use cat industrial paint it holds the best, if you going to pull it gives you less wind resistance, Potter



[Log in to Reply]  [No Email]
Phil S.

02-22-2004 14:49:39




Report to Moderator
 Re: Re: Procuring Paint in reply to Potter, 02-22-2004 14:40:43  
Nice idea Potter.. I know these Molines are FAST.. I have 4 of them.. but do you think wind resistence is really a factor?? hehe.. (joking with you!!)

Phil S.



[Log in to Reply]  [No Email]
moline

02-22-2004 18:08:00




Report to Moderator
 Re: Re: Re: Procuring Paint in reply to Phil S., 02-22-2004 14:49:39  
I put a spoiler on my Z for extra downforce in a corner.Because,like any good mannered MM man,when I get to the end of the track,I turn and pull the sled back for the next guy!!LOLSeriously though,I get my paint at R&M distributors in Vail Iowa.It is good quality acrylic enamel.Try to stay away from standard oil base implement enamel as it doesnt seem to hold a shine very well and is less scratch resistant.Thanks and dont breathe the hardner vapors,Moline

[Log in to Reply]  [No Email]
Joe

02-24-2004 20:28:45




Report to Moderator
 Re: Re: Re: Re: Procuring Paint in reply to moline, 02-22-2004 18:08:00  
Do you have a contact number for R-M? I can't find mine.

Thanks
Joe



[Log in to Reply]  [No Email]
moline

02-25-2004 10:20:06




Report to Moderator
 Re: Re: Re: Re: Re: Procuring Paint in reply to Joe, 02-24-2004 20:28:45  
Joe, the number is 712-263-3116. Thanks,moline



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy