25 Disc Parts

Thanks,
Joel

First, there's 2 different bearing designs. For simplicity, we'll call one the "old" and the other "new".

OLD is identified by the scraper bar being a piece of narrow channel. NEW is identified by that bar being a heavier piece of angle iron. MOST are NEW.

NEW parts; TOP bearing shell, 663 843 M1. Spool, 663 844 M1. Bottom bearing shell, 663 845 M1. MF triple triangle decal (same on both NEW and OLD) 196 363 M1. Massey Ferguson emblem on rear of frame, 196 354 M1.

OLD parts; TOP bearing shell, 662 046 M2. Spool, 663 447 M1. Bottom bearing shell, 662 047 M1. Massey-Ferguson decal on rear of frame, 196 335 M1

Scrapers; (same on NEW and OLD) Left regular, 662 014 M2. Right regular, 662 013 M2. Left end, 662 012 M2. Right end, 662 011 M2.

Joel

Thanks,
Joel

I found the decals on EBAY, but they're available through MF/AGCO. Bearings on mine were in really good shape, so no need for new. A friend just rebuilt his #25 and used the "generic" boxings (iron bearings) from Agri-Supply and they fit just fine. He got the outer shell and the inner spool as a set.

Here is the link to AgriSupply parts, the page is big it takes a while to load. I see a lot of Dearborn/Ford but no MF. If you could find out what worked for your friend I would much appreciate it. Maybe the Ford parts will work on the MF? Thanks.

• AgriSupply Disc Axles and Parts

I've got a parts manual on the #25. If you need MF part #'s on the boxings, let me know. Also, the decals have part#'s too if you want to order through MF. Fair warning though, decals through AGCO are NOT cheap.