TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum

Before and after

Welcome Guest, Log in or Register

Author

MF Poor

03-12-2008 15:26:02

Report to Moderator

I started with this. An 8'-10" MF #25 disc. OK shape, but a little worn and a LOT rusted.

It was also too wide to haul. I got a bargain on it, so why not? First thing was to pull the axles, cut them down 7-1/2", then re-thread the ends. Then new disc blades for the front and the best of the old ones on the rear. Next, dismantle it, hit it with a sandblaster, prime, and paint.

Before;

[Log in to Reply] [No Email]

Eric in IL

03-12-2008 17:48:39

Report to Moderator

Re: Before and after in reply to MF Poor, 03-12-2008 15:26:02

I have always liked the looks of that series Massey. Your tractor and disk are beautiful. Have you considered contacting the people that are in charge of the Dupont Classic Tractor calender ? That outfit surely qualifies if you ask me ! Thanks for posting.

[Log in to Reply] [No Email]

MF Poor

03-13-2008 01:14:00

Report to Moderator

Re: Before and after in reply to Eric in IL, 03-12-2008 17:48:39

It ain't DuPont paint! OEM MF paint, I believe that's PPG.

[Log in to Reply] [No Email]

jvickerd

03-12-2008 16:49:40

Report to Moderator

Re: Before and after in reply to MF Poor, 03-12-2008 15:26:02

beautifull job on the disc! I can see that its going to be a little hard to use it t first.
by the way- tractor looks grat too.

[Log in to Reply] [No Email]

MF Poor

03-12-2008 15:28:18

Report to Moderator

Re: Before and after in reply to MF Poor, 03-12-2008 15:26:02

I'm gonna hate to get it dirty! (NOT!!!!)

and after; Here is the 7'-6" version.

[Log in to Reply] [No Email]

MF Poor

03-12-2008 15:29:45

Report to Moderator

Re: Before and after in reply to MF Poor, 03-12-2008 15:28:18

From another angle;

[Log in to Reply] [No Email]

MF Poor

03-12-2008 15:31:07

Report to Moderator

Re: Before and after in reply to MF Poor, 03-12-2008 15:29:45

And another angle;

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy