Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Mf 135 hy lift cover adj.

Welcome Guest, Log in or Register
Author 
Mark G.

12-01-2000 17:21:25




Report to Moderator

Has any one had any exp adj internal linkages on the lift cover. I rebuilt my ram cylinder and can make all the adj using mf manual except one which needs a special mf gage block. dealers cant help and manual does not give any measurement. I hate to guess and goof it up. Was hopeing someone has done this before and knows the size of this gage block. thanks mark g. in Michigan




[Log in to Reply]   [No Email]
Big Dean

12-01-2000 17:49:18




Report to Moderator
 Re: mf 135 hy lift cover adj. in reply to Mark G., 12-01-2000 17:21:25  
I have done a lot of them with a piece of 1/2 metel it is very close to the tool. If you need more Information on the adjustment E-mail



[Log in to Reply]  [No Email]
to Big Dean:

12-01-2000 18:12:48




Report to Moderator
 Re: Re: mf 135 hy lift cover adj. in reply to Big Dean , 12-01-2000 17:49:18  
I was going to guess that using mfn tool 970 by looking in mf shop book that it was between 1/2 and 5/8 thick. thanks for the back up. Ps i have been reading your replys in the forums and i got to say you know your stuff. thanks again, mark g.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy