Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

loader/ 135 Fan

Welcome Guest, Log in or Register
Author 
mf40-me

09-25-2007 07:18:25




Report to Moderator

Sorry that it took me so long to get back on here. Mine is odd. The loader looks just like the mf 34 loader, at least from pictures. The loader thati have could be older, as it is very very worn, but then again so is the tractor. I have the supposedly original owners manual which is for an MF40, and except for the tranny every picture and diagram is identical to what the tractor actually is. I would love to see the picture that you have, perhaps you could email me?

Would you have a guess what engine rpm would give a 540 pto? My tach doesn't have a mark, perhaps it is written below but 35 years of being outside has taken it's toll on the lower section of my tach, and all is eligible.

Thanks to you Dave, the tractor is currently in the garage, but when it is back together i will send you a picture of it, should you care.

[Log in to Reply]   [No Email]
135 Fan

09-25-2007 10:10:17




Report to Moderator
 Re: loader/ 135 Fan in reply to mf40-me, 09-25-2007 07:18:25  
An MF34 loader would be correct for an MF40. Maybe a really early one might have had a 200 loader put on it? 540 pto would be around 1700 rpm. I have the world wide guide to MF industrial and construction equipment. It has pictures of most models except an MF40. I have seen MF 40's before. It shows a couple pictures of a UK MF40 with a really nice 4 bar mechanical self leveling loader. The UK model could be ordered with a manual transmission.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy