Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

44 bull gear play

Welcome Guest, Log in or Register
Author 
Robin Mach

06-02-2007 13:16:33




Report to Moderator

Hi all,

How much play is acceptable in a 1952 44RC in the spline between the axle shaft and the bull gear? I've got just enough play that you can see the bull gear tilt about 1/16" side to side when you grab it with both hands and push/pull.

Thanks for any and all answers,

Robin




[Log in to Reply]   [No Email]
Robin Mach

06-03-2007 11:06:04




Report to Moderator
 Re: 44 bull gear play in reply to Robin Mach, 06-02-2007 13:16:33  
Thanks Marlowe. In that case, mine is in great shape. Have a great day.



[Log in to Reply]  [No Email]
marlowe

06-02-2007 19:18:18




Report to Moderator
 Re: 44 bull gear play in reply to Robin Mach, 06-02-2007 13:16:33  
they have a lot. they are not a tight fit just had one of mine apart and the bull would move about half a tooth been like that for years and still going strong



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy