Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

Massey Ferguson Industrial help

Welcome Guest, Log in or Register
Author 
Ian Hill

12-05-2006 03:25:19




Report to Moderator

third party image

Hi There,

I recently purchased a small MF Industrial for use on my smallholding in Soham, England. It was sold as an MF35X Industrial, but I now have my doubts. Its fitted with a Perkins AD3.152 engine, which appears to have the Serial Number, 2329220C stamped on the left hand side of the engine block, just behind the side radiator hose outlet. The identification plates are painted over and illegible. Attached is an image of it, I would be sincerely greatful if anyone can identify it. I have other pictures of it at>Link

Kind>Link regards

Ian

[Log in to Reply]   [No Email]
GaryF

12-06-2006 14:53:37




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to Ian Hill, 12-05-2006 03:25:19  
Hi .... sorry I didn't catch the link to where the other photos of your new tractor are. You also said that you live in England. I guess that there is no question that yours is a UK model tractor. It reminds me of a late North American MF203 because of the Direct Injection and the Diff Lock it also has planetary rear axles and dry disc brakes. Checked with Puddings World which is a handy Aussie website. From what you state it is most likely the UK version of the MF203 and being a late model is would be the MK2 version as previously stated. As for the loader??? It all looks to be a very sturdy unit and should stand up quite well. The North American versions were based on the MF35 the gas versions (204&202)didn't have the planetary rear axles so were more similar to the AG tractor. Gary

[Log in to Reply]  [No Email]
135 Fan

12-05-2006 19:50:07




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to Ian Hill, 12-05-2006 03:25:19  
It's an industrial model for sure. I tend to agree with mn. Chuck on a 203-205 MKII. Dave



[Log in to Reply]  [No Email]
mn.Chuck

12-05-2006 16:24:04




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to Ian Hill, 12-05-2006 03:25:19  
Hi Ian, there should be a s/n plate in the lower
dash area. But I believe that(does the hood tilt
to the side?)it is a 203 if has reg. clutch or a
205 if it has instant reverse(foot pedals on r/h
side to shift fwd and reverse. There were 202 and
204 models but they are gas. The loader model is
seperate, most likely by the picture, a early 200
loader prior to self leveling. Chuck

[Log in to Reply]  [No Email]
Ian Hill

12-06-2006 00:25:41




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to mn.Chuck, 12-05-2006 16:24:04  
Hi Chuck,

the lid does open to the side, and unfortunately the S/N plate is completely unreadable, its a pity they were printed rather than stamped.
It does have a regular clutch though.

I purchased it via eBay a couple of weeks ago and traveled to Lancaster to get it. She"s not in too bad a shape, the engine is pretty sound, but the hydraulics and electrics are completely bodged. For some reason, the hydraulic filler tank behind the radiator was short circuited by a bit of garden hose.

regards

Ian

[Log in to Reply]  [No Email]
mn.Chuck

12-05-2006 16:23:15




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to Ian Hill, 12-05-2006 03:25:19  
Hi Ian, there should be a s/n plate in the lower
dash area. But I believe that(does the hood tilt
to the side?)it is a 203 if has reg. clutch or a
205 if it has instant reverse(foot pedals on r/h
side to shift fwd and reverse. There were 202 and
204 models but they are gas. The loader model is
seperate, most likely by the picture, a early 200
loader prior to self leveling. Chuck

[Log in to Reply]  [No Email]
mf 188

12-05-2006 11:06:44




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to Ian Hill, 12-05-2006 03:25:19  
Hi, i think i saw this tractor on ebay.The hydraulic top,and the hydraulic responce control on the side,Suggests its based on a mf135,I have seen similar industrial tractors advertised as mf702 ,mf703 ,mf203. I dont know which is correct.Someone out there will be able to tell us more about these models.It has a better starting engine than the mf35.Mf 135s are a great little tractors so i hope you enjoy it.

[Log in to Reply]  [No Email]
Joe Ferguson

12-05-2006 07:18:47




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to Ian Hill, 12-05-2006 03:25:19  
Hi Ian

As per the steering tie rod on the photo
It appears to be MF-35 or MF-135 series

Joe Ferguson



[Log in to Reply]  [No Email]
GaryF

12-06-2006 04:21:14




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to Joe Ferguson, 12-05-2006 07:18:47  
Ian you may have to post a few more pics as you are just teasing us!
The fenders are UK maybe the whole tractor is. The loader frame looks like a MF200 or MF32 BUT the filter is on the opposite side and they didn't have diagonal braces. Front casting makes me think MF203 also. Gary



[Log in to Reply]  [No Email]
Ian Hill

12-06-2006 12:03:45




Report to Moderator
 Re: Massey Ferguson Industrial help in reply to GaryF, 12-06-2006 04:21:14  
third party image

Hi Gary,

heres another pic, that might help

regards

Ian



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy