TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Engine rebuild

Welcome Guest, Log in or Register

Author

Jim

06-21-2000 07:48:02

Report to Moderator

I have a 59 Massey Ferguson 50, I need to rebuild the engine and replace the governor. If anyone knows the cheapest place to get the parts please let me know. I would like to upgrade the available power to, but not if it is a lot more money. It is a Z134 gasoline engine. Also would like to hear from someone who has done it and let me know what to expect on replacing the sleeves.

[Log in to Reply] [No Email]

B.C

06-22-2000 10:41:15

Report to Moderator

Re: Engine rebuild in reply to Jim, 06-21-2000 07:48:02

I did this about 15 years ago. Got my parts from Central Tractor.I had the clutch relined at a local brake rebuilder.

Pulling the sleeves wasn't bad once I made up a puller. I got a round plate machined to pilot on the bottom of the sleeve, o.d. to clear the sleeve bore as it was pulled up. The pulling part was a piece of 1/2 or so ready rod with a cross bar and spacers placed across the top of the block. All four sleeves came right out, nice as could be.

The replacement sleeves were about1/16 or so oversized.

One thing, be very sure you put that #3 main bearing in the right way.

Other people would probably tell you to check the rocker arms for wear. There's corks that fit in the ends of the rocker shaft. Be sure all that is still sound.

Other than that, it should be straightforward. I've always thought that Z134 was a nice little engine.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy