Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

M F 95

Welcome Guest, Log in or Register
Author 
Mark Steinmann

12-04-2005 17:30:28




Report to Moderator

can anyone tell me what engine that was put in the 95 and anything about it ( c.i.)




[Log in to Reply]   [No Email]
Chuck S.

12-07-2005 17:24:50




Report to Moderator
 Re: M F 95 in reply to Mark Steinmann, 12-04-2005 17:30:28  
The engine is a 425 cid, 4.250 x5. It could be either gas lp or diesel. Later version of same engine did develop 95 pto hp [ G900 MM ] The tractor was built by MM for Massey, can bbe up graded to 504 cid by replacing blockes and pistons



[Log in to Reply]  [No Email]
mn.Chuck

12-05-2005 18:05:29




Report to Moderator
 Re: M F 95 in reply to Mark Steinmann, 12-04-2005 17:30:28  
Further reading in "Massey Ferguson Tractors" gives it 425 cu in. 65 HP on
the belt at 1300 RPM and 63.5 HP on the
drawbar at 1500 RPM. First batch sold in
1958 and sales were about 700 annually
til the 97 came out in 1961. Found a color picture of a 95 Super. I can't seem to scan lately. Chuck



[Log in to Reply]  [No Email]
mn.Chuck

12-05-2005 15:07:58




Report to Moderator
 Re: M F 95 in reply to Mark Steinmann, 12-04-2005 17:30:28  
I forgot to mention that if you can't find
manuals the operator manual p/n is 690443M1
and the parts book has two options: MF 95
tractor 651032M91 or the Super 95 is
651107Ml. Should be orderable from your local
Agco/MF dealer. Chuck.



[Log in to Reply]  [No Email]
mn.Chuck

12-05-2005 15:01:51




Report to Moderator
 Re: M F 95 in reply to Mark Steinmann, 12-04-2005 17:30:28  
According to "Farm Tractors of North America"
the 95 was built in 62-63.78 est pto hp. 6
cyl.4.25 x 5" bore and stroke. 1500 RPM. Eng
built by MPLS. Moline. Wt.7620 shipping wt.
w/o fluid in tires or any access or other
fluids. From comparing same book Mpls Moline
should be same as model GVI. Chuck.



[Log in to Reply]  [No Email]
AllanC

12-05-2005 20:51:13




Report to Moderator
 Re: M F 95 in reply to mn.Chuck, 12-05-2005 15:01:51  
A '95 is a Minnie GVI (G6) in red paint. The '97 is a MM also. Most service lit is for the Minneapolis. They were a good pulling tractor, hydraulics are weak.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy