TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum

1100/1130/1150 Cabs

Welcome Guest, Log in or Register

Author

TWM

10-20-2005 19:16:47

Report to Moderator

I'm looking for pictures of the interior of these tractors. Does anyone have any or know where to get some? Just looking for reference.

[Log in to Reply] [No Email]

billybunter

10-21-2005 13:00:39

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to TWM, 10-20-2005 19:16:47

Hi
I have just purchased a 1150 which I think has a fairly good cab but have not taken delivered as yet. If you dont get any other pictures give me an E-mail in about a month and I should be able to help.

[Log in to Reply] [No Email]

TWM

10-21-2005 18:44:46

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to billybunter, 10-21-2005 13:00:39

Thank you!

Let me know what you think of the 1150. They sure look like a tough tractor.

[Log in to Reply] [No Email]

chuckinnc

10-21-2005 06:35:20

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to TWM, 10-20-2005 19:16:47

I have a 1135 plain & 1105 with a cab, i have photos in the photo section of this site, If you let me know what photos you need i will try and help, the heating and air cond have been removed long time ago so its just a plain factory cab.

Search: (1975 massey ferguson 1105) in the photo section.

[Log in to Reply] [No Email]

TWM

10-21-2005 10:33:25

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to chuckinnc, 10-21-2005 06:35:20

Thanks! I believe i've downloaded that pic before. Nice!

I'm just trying to remember what stuff was like on the dash, the controls on the right, the heater/ac, and the area behind the seat. Just trying to get a better rememberance of the 1155, and curious what the earlier series models were like before the 1155.

[Log in to Reply] [No Email]

Logan

10-21-2005 05:45:36

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to TWM, 10-20-2005 19:16:47

We got an 1100 with a cab (bought it 4 years ago not running and had it apart 3 times now...its possesed i swear) but the cab and interior are in saprisenly good shape. Maybe this weekend we will get the final problem figured out..#5 piston hits valves, wrist pin must be junk or something. and ill get you some pictures. I almost bet a MF dealer should be able to get the interior.

[Log in to Reply] [No Email]

TWM

10-21-2005 06:10:08

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to Logan, 10-21-2005 05:45:36

We used to have an 1100 and 1130 with cab. Also two 510 combines. Grandpa used to custom combine back in his day. I never got to see them though. My father inherited one of them and the other was sold on an auction with the second 510 (father inherited the 510 diesel). We used to have a 1155 that was in nice shape besides a cog out in the rearend. I remember running that when I was younger. That was a nice tractor. Then, unfortunately, it was traded for a 2745. The 2745 is nice, but I feel we have had it split more than we should have for multipower issues. Everything works good now though, and the engine has a fresh rebuild. I don't mind the interior on this one, it's just like the 2775 that my grandpa had. But I liked the gear shift position and even the cab design of the 1155.

I'd like to get a few more tractors if I ever take over the farming operation. Right now we just run the 2745, but it is overkill for some things. I'd like to get an 1100 and 1135, but don't know a lot about the 1100's.

Some pictures would be greatly appreciated! Do you have any of the interior of the next generation of tractors (1105->)? Some of the dash and the controls on the right, and behind the seat? Wasn't there two windows on the back behind the seat?

[Log in to Reply] [No Email]

Dewayne Wise

11-24-2005 04:01:54

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to TWM, 10-21-2005 06:10:08

1105 did have 2 windows making the drawbar hookup easier to see. They were behind the seat below the big rear window.

[Log in to Reply] [No Email]

Logan

10-23-2005 11:54:54

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to TWM, 10-21-2005 06:10:08

I could get some of the 1105, but the cushion on the fender wells are gone. Floor mat is also worn out. Tractor has 8500 hours on it and was never O/H yet. The 1155 never did have the cushion on fenders as long as we owned it, but that one has the floor mat (their expensive, $300) The 1130 dont have a cab and the 1100 spun a dam berring after the 2nd time its been put together (1st time we never heard it run) So we got it apart for the 3rd time. Unbelieveably the crank is still good, but it wasnt run long i guess.

[Log in to Reply] [No Email]

TWM

10-23-2005 12:53:08

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to Logan, 10-23-2005 11:54:54

It's up to you then.

Good luck on the 1100.

[Log in to Reply] [No Email]

kirk in Ks,

03-10-2006 06:56:28

Report to Moderator

Re: 1100/1130/1150 Cabs in reply to TWM, 10-23-2005 12:53:08

Hi TWM,
I saw your Input on 1100 Massey,s,
and I wanna get an 1155 too,
their really cool, as I tried one out last year
at a dealer, and was it fun ,zowie!
I love this thing it was awesome,
and the sound of that Perkin,s 540 ci was incredible,
\this one had twin pipes on it,and it really roeared,
Only Mozart could"ve done better.
Ive seen the 2000 series Massey,s,and I like em ok, but their not a 1000 series with the nice cab,
and the control,s where you want them.
On the dash!
Kirk C,

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy