Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

MF-50 tach drive gear

Welcome Guest, Log in or Register
Author 
Yooper-Al

10-13-2004 16:30:32




Report to Moderator

I've lost track of the small tach drive gear that screws into the generator armature shaft on my '63 MF-50. While exchanging my bad generator, I found that the shaft of the new one was bored internally but not threaded to accept the drive gear. The gear was treaded a goofy 3/8" X 32 threads per inch (British, perhaps?). By the time I ordered and received find the correct tap, I'd lost the small gear. Anyone have one that they might part with?
Many thanks in advance. Three inches of fresh snow today here in the mountains of New Mexico!
Al

[Log in to Reply]   [No Email]
Fred Wolfe

10-13-2004 20:22:52




Report to Moderator
 Re: MF-50 tach drive gear in reply to Yooper-Al, 10-13-2004 16:30:32  
Email for drive gear.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy