Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

MH Pony question....what is this?.....

Welcome Guest, Log in or Register
Author 
Mark Jackson

10-03-2004 15:13:56




Report to Moderator

third party image

Hi all, I appreciate any help you can provide in advance-I have a MH Pony with no hydraulics and hand lift-it has a snowblade on it now-on the outside of the right fender, it has a handle I am sure is there from MH originally-six different settings on the handle-this is not the hand lift-it is behind that and along the fender. I have a photo of it at the link below. I almost want to think it is perhaps for angling the blade but the blade is not set up for that...any idea's?? Be happy to email a photo to anyone direct...thanks again....

[Log in to Reply]   [No Email]
51Pony

10-04-2004 05:15:12




Report to Moderator
 Re: MH Pony question....what is this?..... in reply to Mark Jackson, 10-03-2004 15:13:56  
Mark / Joe,
The bracket is for altering the angle of the sickel bar mower as the main housing rides along teh ground. The lift for this mower is a chain off the top of that frame, attached to the triangular lift bracket on the Pony. I can try to take a picture of the mounting instructions if it would help.



[Log in to Reply]  [No Email]
Stan(PA)

10-03-2004 18:52:25




Report to Moderator
 Re: MH Pony question....what is this?..... in reply to Mark Jackson, 10-03-2004 15:13:56  
Hey Mark, that thing sure would look good with a stainless muffler on it! ..... Stan



[Log in to Reply]  [No Email]
Mark Jackson

10-03-2004 19:02:20




Report to Moderator
 Re: MH Pony question.... in reply to Stan(PA), 10-03-2004 18:52:25  
Stan...do you make the stainless mufflers?...I make the Pony grilles and original style mufflers but have been asked before for the stainless one--even as recent as yesterday..if you make them can you send a photo? Never seen what a stainless one would look like on it...may be able to sell a bunch for you...Mark



[Log in to Reply]  [No Email]
Stan(PA)

10-03-2004 19:07:46




Report to Moderator
 Re: MH Pony question.... in reply to Mark Jackson, 10-03-2004 19:02:20  
Mark, I"m just screwing with ya! It was me that asked. Let me know what happens with the stainless, and save me a grille. .....Stan



[Log in to Reply]  [No Email]
Joe in Ontario

10-03-2004 18:33:39




Report to Moderator
 Re: MH Pony question....what is this?..... in reply to Mark Jackson, 10-03-2004 15:13:56  
Mark: that lever is not for the blade but is for the side mount sickle hay mower that was made for the pony. It tilts the bar of the mower. We have the A-frame and the blade for the pony but dont have the parts to lift it. We wish you had a side-view picture of how the blade is lifted. Thanks in advance. Joe



[Log in to Reply]  [No Email]
Dave Doman

10-20-2004 13:14:02




Report to Moderator
 Re: MH Pony question....what is this?..... in reply to Joe in Ontario, 10-03-2004 18:33:39  
Hi I am looking for a wiring diagram for a 50 Pony. In particular the charging system. Is it tied into the light switch? Thanks Dave



[Log in to Reply]  [No Email]
Mark Jackson

10-03-2004 18:45:34




Report to Moderator
 Re: MH snowplow side view.... in reply to Joe in Ontario, 10-03-2004 18:33:39  
Thanks for the super quick reply Joe! That makes sense-I wasn"t even thinking it could of been for another implement--one track mind! I"ll pull my tractor out tomorrow and take some real good pictures for you of the lift-I can post a couple here or just send me your email and I"ll send them direct-happy to help out and can take as many photo"s/measurements as necessary to get yours working...Thanks again! [email protected]

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy