Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Massey Harris 333/plow and loader

Welcome Guest, Log in or Register
Author 
Rodney

04-04-2000 18:03:00




Report to Moderator

Can anyone tell me how big of plow my 333 will pull? I have a real nice tractor and would like to find a plow that I could use. Also, what kind of loader would fit it. I have a wide front on it and would like to find a load that would work.




[Log in to Reply]   [No Email]
Rob

04-14-2000 06:56:22




Report to Moderator
 Re: Massey Harris 333/plow and loader in reply to Rodney, 04-04-2000 18:03:00  
Oh,we also have a factory loader for the tractor. My uncle got it when he bought the tractor new in 1955. We recently put cylinders on the bucket and mounted a bale spike in it. It worls pretty good and lifts he big round bales with no problem. Someone told me the loader was made for Massey by Freeman, but I am not sure of this, I couldn't find a plate with a serial number on it anywhere.



[Log in to Reply]  [No Email]
Mike from Ontario

04-05-2000 05:08:55




Report to Moderator
 Re: Massey Harris 333/plow and loader in reply to Rodney, 04-04-2000 18:03:00  
Rodney
The Masey 333 was rated a 2-3 plow tractor, and of course the soil where you live is going to be a factor in the size you will be able to pull. As for the loader, I don't know a model # for that tractor, but about the only loader available for those tractors was the old tube type with the trip bucket.
Mike Leggett



[Log in to Reply]  [No Email]
Rob

04-14-2000 06:41:00




Report to Moderator
 Re: Re: Massey Harris 333/plow and loader in reply to Mike from Ontario, 04-05-2000 05:08:55  
Unless you have really heavy soils it should easily pull three 14" plows. I have a MH 44 diesel and it will pull 4/14" plows in moderately heavy soil. Only problem I had was that the cylinder on the threepoint would not lift them. I replaced the cylinder and it now works fine but it is a little light on the front end.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy