TO-35 Engine Rebuild

I recently sent the tractor to be repaired and I have been told that a complete engine rebuild would be the best thing since there is some scoring on a main bearing. 'Might as well do the top end while we are at it'.

The last estimate that I heard was almost $3,000

The tractor still starts right up and does not make any strange noises.

Is this type of overhaul advisable?

I would like to keep using this tractor for years to come but I can't see putting new pistons, valve job, etc unless there is some evidence of damage or impending failure.

Thanks for reading all of this..

SP

best wishes
TO

I have been advised that the parts will cost about $1000. Sleeves, pistons, wrist pins, bearings, valves, etc.

The crankshaft had some scoring on the mains and will need to be cut. To me it did not look that bad for something 50 years old but what do I know.

The oil pump shaft was sheared and needs to be fixed.

The govenor was also broken in pieces and in the oil pan.

The block and head will be send out, boiled clean
and checked for leaks and cracks.

He will have to paint the engine after it is reassembled.

I am hopeful that this price also includes the pick up and delivery of the tractor.