Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

MF 236 Loader

Welcome Guest, Log in or Register
Author 
John MB

03-16-2004 17:06:45




Report to Moderator

Recently acquired this loader but it is missing the cutting edge on the 72" combination bucket. I would like to have the width and thickness of the material to make a replacement.




[Log in to Reply]   [No Email]
Bob

03-17-2004 18:07:20




Report to Moderator
 Re: MF 236 Loader in reply to John MB, 03-16-2004 17:06:45  
I got a used snowplow wear edge from the town highway department. It worked very nicely.



[Log in to Reply]  [No Email]
CHUCK

03-17-2004 09:44:59




Report to Moderator
 Re: MF 236 Loader in reply to John MB, 03-16-2004 17:06:45  
John,
I just checked the one on my 236. It is 1/2 inch thick by 4 inches wide. Dont know if it org. but that is what is on mine. If you need a pic let me know. My 236 is on a 73 mf 135. A bit big of a loader for that small of a tractor but the whole thing was givien to me. Tractor, loader and ROPS with lights and tool box. Will post a pic when I get it all together.

[Log in to Reply]  [No Email]
John MB

03-17-2004 11:06:19




Report to Moderator
 Re: Re: MF 236 Loader in reply to CHUCK, 03-17-2004 09:44:59  
Thanks Chuck. I have been following your story. Mine is on a Super 90 WR Diesel. I too, got mine free. It came with some land a friend bought. It had been sitting for about 12 years and the neighbours had been stealing parts such as starter,PS pump[yeah, the rare one] hydraulic hoses etc. but it only had 2500 hours on it. I have located all the parts, cleaned the injection pump and now it starts better than anything else I own. It is a good shedmate for my TO-35. I had a feeling it was too good for scrap without at least trying. Thanks again and have a good day.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy