Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

slant six in a 101

Welcome Guest, Log in or Register
Author 
larry

11-14-2003 21:01:13




Report to Moderator

I have some 101 chassis laying around that don't have engines, I have heard that a slant six dodge motor fits in relatively easy, I have one of these motors too. Just wondering if anyone has done this or seen it done, thanks for any help




[Log in to Reply]   [No Email]
Alberta Mike

11-15-2003 07:03:22




Report to Moderator
 Re: slant six in a 101 in reply to larry, 11-14-2003 21:01:13  
If there is any tractor that will take a transplant it would be the 101/102 chassis Massey. The open cast iron tub would hold almost anything I would think. The drop in engine/clutch unit with the short driveshaft is an ideal situation I would say. Coupling the Massey clutch & housing up to the back of the new engine will need some sort of an adaptor plate but a lot of guys have made those over the years (not me though).

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy