Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Massey Harris & Massey Ferguson Tractors Discussion Forum
:

pony

Welcome Guest, Log in or Register
Author 
jd puller

10-19-2003 12:14:11




Report to Moderator

what is a massy harris pony that has been made in canada?




[Log in to Reply]   [No Email]
Stan(PA)

10-20-2003 10:58:57




Report to Moderator
 Re: pony in reply to jd puller, 10-19-2003 12:14:11  
Your Pony would be very special if it were built in the US. The Ponys were built by Massey Harris and are Canadian. They were also built in France,and I believe these were the "grey" Ponys, rather than the Massey "red" Ponys of Canada. I have a 1951, and they are nice little mowing tractors.



[Log in to Reply]  [No Email]
Ken

10-20-2003 11:01:13




Report to Moderator
 Re: Re: pony in reply to Stan(PA), 10-20-2003 10:58:57  
Both my Grey Ponys were built in Canada.



[Log in to Reply]  [No Email]
Stan(PA)

10-20-2003 14:19:39




Report to Moderator
 Re: Re: Re: pony in reply to Ken, 10-20-2003 11:01:13  
What's the difference in them, from the red ones? I always thought the grey ones were French.



[Log in to Reply]  [No Email]
Ken

10-20-2003 18:52:29




Report to Moderator
 Re: Re: Re: Re: pony in reply to Stan(PA), 10-20-2003 14:19:39  
From what I have read or heard when Massey Harris and Fergusen combined Ponys that were sold at previous Massey dealers were painted red and ones sold at previous Fergusen were painted grey.

Another source, Massey Data Book, said all grey Ponys came in one block of serial numbers 23149-
23,853 and 1955?-24090.

Some of the implements that came with one of my grey Ponys were grey and some red.

[Log in to Reply]  [No Email]
Dave

10-19-2003 23:25:25




Report to Moderator
 Re: pony in reply to jd puller, 10-19-2003 12:14:11  
most were made in Canada or France



[Log in to Reply]  [No Email]
Ken

10-19-2003 19:07:00




Report to Moderator
 Re: pony in reply to jd puller, 10-19-2003 12:14:11  
Your question is not clear to me. I have six Ponys all made in Canada and possibly can answer your question.



[Log in to Reply]  [No Email]
Jd Puller

10-19-2003 22:04:17




Report to Moderator
 Re: Re: pony in reply to Ken, 10-19-2003 19:07:00  
I now nothing about M-H. I guess what I am trying to figure out is if the pony I have that has Canada stapped all over it is something special or just a run of the mill pony.



[Log in to Reply]  [No Email]
Ken

10-19-2003 22:21:15




Report to Moderator
 Re: Re: Re: pony in reply to Jd Puller, 10-19-2003 22:04:17  
All mine were made in Canada. They were also made in France.



[Log in to Reply]  [No Email]
jim

10-20-2003 06:30:29




Report to Moderator
 Re: Re: Re: Re: pony in reply to Ken, 10-19-2003 22:21:15  
As far as I know , the majority of the ponys were made in Canada,in Woodstock Ontario. I believe construction was moved to France after production ceased in Woodstock. I think later French models had small diesels as well.



[Log in to Reply]  [No Email]
Dave_Id

10-19-2003 21:37:09




Report to Moderator
 Re: Re: pony in reply to Ken, 10-19-2003 19:07:00  
Ken, so you are the guy that has the Pony answers. I have a Pony PGA1050, very early, it has no breather (No mounting holes on motor like a 101 Senior), but it has a hole in the hood for one, unless it's not origianal hood, and no Oil filter. Did the early ones have these, I know the later ones did?. The carb is open underneath to accept a crossover pipe. Who is a good source of used Pony parts? Pony's, Massey Harris in general are very rare in the Idaho panhandle

[Log in to Reply]  [No Email]
Ken

10-20-2003 10:49:38




Report to Moderator
 Re: Re: Re: pony in reply to Dave_Id, 10-19-2003 21:37:09  
I don't have nearly all the answers. I am still finding things to question. I frequently refer to my operator's, parts and service manuals. I also look at several sites trying to find more about the Pony.

As far as I know both the breather and oil filter was installed on the first Ponys. I will review the parts manual and try to find if this was so.

Parts can be found at Fred Wolfe's. His address is [email protected]. There are several other people that sell used and repro parts. They advertise in the Massey magazine "Wild Harvest."
I also have several tractor and implement parts.

[Log in to Reply]  [No Email]
Ray-s

10-19-2003 13:29:40




Report to Moderator
 Re: pony in reply to jd puller, 10-19-2003 12:14:11  

Link
There are all the specs for MH pony at the above site.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy