Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

MF135 Governor

Welcome Guest, Log in or Register
Author 
keith thompson

06-30-2003 10:02:04




Report to Moderator

I recently Rebuilt a 4 cyl gas Contental Engine. What is the procedure for adjusting the linkage on the Governor? Engine runs great but can't tell if governor is working. I've adjusted on the linkage a little but I'm getting no where.
I did install a new governor during the rebuilding
process. What manual would this procedure be found in? Any suggestions would be greatly appreciated.




[Log in to Reply]   [No Email]
Tom G (OK)

07-02-2003 17:35:58




Report to Moderator
 Re: MF135 Governor in reply to keith thompson, 06-30-2003 10:02:04  
Keith,

I have the shop manual, and it's several pages of instructions. Maybe you could check with your local massey service/dealer and xerox those pages. If you can't work that out, I could try scanning the pages and sending them to you.

TOM



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy