Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Building a three point hitch blade

Welcome Guest, Log in or Register
Author 
Rob

02-28-2003 13:40:54




Report to Moderator

I am building a three point hitch blade for my TO 35 Massey Ferguson tractor and am looking for some drawings for dimensions. Any drawings will do.




[Log in to Reply]   [No Email]
mj

03-02-2003 19:36:39




Report to Moderator
 Re: Building a three point hitch blade in reply to Rob, 02-28-2003 13:40:54  
Gather up your pencil, paper and tape measure and head on down to your local farm store where they have new blades and go for it! If you think they might be a bit 'pushed' by your actions and their stuff is outside, go when they're closed. I get a lot of info this way!



[Log in to Reply]  [No Email]
Craig

03-02-2003 19:02:17




Report to Moderator
 Re: Building a three point hitch blade in reply to Rob, 02-28-2003 13:40:54  
You might want to look for some farm auctions in your area for a blade. It might save you a lot of time and aggravation. It might even save you some money unless you already have some of the material. In my area a decent good built blade will usually go from $100 to 200. I have seen some light duty ones go cheaper than that, but they are ususally bent up. Hope this might help



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy