TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Front crank seal

Welcome Guest, Log in or Register

Author

Mike

05-04-2002 03:49:19

Report to Moderator

High , This is Mike, I have a M. F. 205 industrial with the A3-152 Perkins. I am installing the front crank seal and am having some trouble. My book says to install it 3/32" deep ,but my pully has a flange on it that protrudes about 3/16" into the housing, so it hits the seal. The seal is a double lip seal, the spring loaded lip fits the hub fine, but the dust lip is about 1/16" larger diamater than the seal serface of the hub and protrudes about 1/16" in front of the seal.Is that dust lip supposed to ride on the face of the flange or on the same surface on the hub as the spring lip? Are there two seal hub sizes, mine is 2 1/4"?
The seal is perkins ,did I get the wrong seal or is my book wrong, Maybe 3/16" instead of the books 3/32". I am waiting for a reply from Big Dean , and I am interested in what you all think?
Thanks again, Mike

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy