Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

HELP! WTB MF 35 Clutch parts...

Welcome Guest, Log in or Register
Author 
gerald

06-02-2001 17:08:18




Report to Moderator

I split my tractor last night and found out that the clutch release bearing froze and ground its way thru the three lever arms and bearing carrier on the other side. I found a used carrier and its on its way. I would like to see if anyone has the three cast iron release lever arms. THis is a dual clutch tractor and the arms have the adjusting bolts. This is a low budget job and the complete kit is way too much for my wallet right now with a trip to disney right around the corner. Help me get the tractor out of the garage and the wifes car back in :) Gerald [email protected]

[Log in to Reply]   [No Email]
Randy Cornelius

06-05-2001 19:05:14




Report to Moderator
 Re: HELP! WTB MF 35 Clutch parts... in reply to gerald, 06-02-2001 17:08:18  
I have two places that I have found to be good for MF parts new and used. For good used parts call Cook Tractor Salvage in Clinton, Mo 1-800-769-5823. The other is Abiline Machine, Abline Ks. I could not find their phone number but they are on the web. Just use a search engine.

Lots of luck.

Randy



[Log in to Reply]  [No Email]
Gary Pearce

06-03-2001 12:39:37




Report to Moderator
 Re: HELP! WTB MF 35 Clutch parts... in reply to gerald, 06-02-2001 17:08:18  
Hope by now you have fixed up your clutch OK
if U need the three clutch adjusting screws that fit to the release lever arms on the dual clutch i have a new set of three 4 u (in the UK though?)
(had to buy a whole trade pack of 10)
let me know could easily weigh and ups at cost.
price for 3 x dome headed screws = � (GBP) 5.00
plus UPS at cost
rgs Gary
[email protected]

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy