Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

M or MT 3point hitch new design

Welcome Guest, Log in or Register
Author 
Bill Thomas

01-01-2004 22:48:48




Report to Moderator

After looking at all the 3 point hitches on the market to fit the M and MT my son and I decided to remove the original drawbar and design one from scratch in its place. We just didn't like the fixed width non adjustability of the ones we saw. Our unit uses conventional cat 1 lift arms with mounting brackets taking the place of the original drawbar and a top link bracket taking the place of the belt pulley housing. We are almost finished with the prototype and plan on taking it to some machinests and getting some bids on making up a batch of them. If anyone is interested in a first class 3 point hitch for their M or MT let me know so I guess at how many to have built. My email is: [email protected]

[Log in to Reply]   [No Email]
Bill

01-02-2004 08:29:15




Report to Moderator
 Re: M or MT 3point hitch new design in reply to Bill Thomas, 01-01-2004 22:48:48  
Hi Mike M, I've been thinking of something along your concept with original and a quick connect setup. Any wrinkles on tilting for a blade, ECT.? Bill



[Log in to Reply]  [No Email]
Mike M

01-02-2004 14:57:13




Report to Moderator
 Re: Re: M or MT 3point hitch new design in reply to Bill, 01-02-2004 08:29:15  
Bill; My set -up does have that draw back.I mainly made it for running a landpride finish mower,works great,and snow plowing I'm sure I could dream up a tilt but for me so far it hasn't been a big problem. I have seen some blades with the tilt built into them which could be an option ? It does have a big advantage of just being able to back up into an implement and hook up and go,I don't have to line up the arms and pull them out over the pins.I can't understand why the Ford type three point caught on but the IHC fast hitch didn't. I have used a fast hitch some and loved it { but not the tractors it came on }

[Log in to Reply]  [No Email]
Bill

01-02-2004 18:26:18




Report to Moderator
 Re: Re: Re: M or MT 3point hitch new design in reply to Mike M, 01-02-2004 14:57:13  
Mike, Amen, as a former fasthitch user I call out to the heavens when putting something on my Fergy.The drawback on fasthitch was you had to use IH. Haven't used the aftermarket quikhitches, but they sure look good. Haven't thought of the angle of tilting after the hitch, Thanks. Bill



[Log in to Reply]  [No Email]
Mike M

01-02-2004 05:06:42




Report to Moderator
 Re: M or MT 3point hitch new design in reply to Bill Thomas, 01-01-2004 22:48:48  
Word of caution ? I don't know which tractor you designed it for,but if you have a MT you better Get hold of a M also or vice a versa. I tried one of those other hitches on a M they work on a MT but on an M the top link will smash
the tool box under the seat. I designed my own hitch that uses the original hitch parts without any harm to them and works like a quick coupler. So far so good after several years.

[Log in to Reply]  [No Email]
Bill Thomas

01-02-2004 05:42:37




Report to Moderator
 Re: Re: M or MT 3point hitch new design in reply to Mike M, 01-02-2004 05:06:42  
We designed this one on a M. It doesen't have a tool box under the seat. Maybe previously removed I don't know. If a tool box were under the seat It would probably hit it in the all the way up position. I would personally rather have a good three point than the tool box. It makes this tractor more verstaile. If a person is stuck on keeping the tractor all original I wouldn't recommend any three point. But They are too good a tractor just to look at.

[Log in to Reply]  [No Email]
all ready on the market..

01-02-2004 04:15:24




Report to Moderator
 Re: M or MT 3point hitch new design in reply to Bill Thomas, 01-01-2004 22:48:48  
how many do you want to buy?



[Log in to Reply]  [No Email]
Bill Thomas

01-02-2004 05:47:34




Report to Moderator
 Re: Re: M or MT 3point hitch new design in reply to all ready on the market.., 01-02-2004 04:15:24  
I'm waiting to see how many people are interested in the one we have designed. I'm thinking of getting 50-100 built.



[Log in to Reply]  [No Email]
Richard

01-02-2004 02:32:48




Report to Moderator
 Re: M or MT 3point hitch new design in reply to Bill Thomas, 01-01-2004 22:48:48  
To follow up, I'm looking at a 1951 MT that's for sale to use to move round bales, scape roads, cut grass/weeds, etc. I know nothing about this machine (deisel vs gas? HP? gears? Desirability as a collectable?) Really, all I know is I need a tractor, its cheap and it runs well. Any info/ help is MOST appreciated!



[Log in to Reply]  [No Email]
Bill Thomas

01-02-2004 06:00:26




Report to Moderator
 Re: Re: M or MT 3point hitch new design in reply to Richard, 01-02-2004 02:32:48  
If someone will let me know how much the average round bale weighs I'll test our hitch too see. We are shortening the lift arms and moving the pivot point as far back as possible to allow maximum lift ability. There might be a need for front weights. Theses tractors will already raise the front end with the stock lift if it is in good shape. I grew up farming but am an engineer now and havent dealt with the round bales. As far weather or not the M/MT is a good tractor, Thats what we used when I was a kid for cultivating and small work along with an A for the bigger work. They aren't the latest and greatest, but they did the job way back then and they still can do it today. All the cheap 3 point implements on the market today makes these old tractors perfect for anybody not wanting to spend 30 thousand for a new tractor. But if production on the farm is your livelyhood go for a new one instead.

[Log in to Reply]  [No Email]
Van

01-02-2004 12:15:31




Report to Moderator
 Re: Re: Re: M or MT 3point hitch new design in reply to Bill Thomas, 01-02-2004 06:00:26  
The round bales I move are between 700 and 900 LBS each. Yah, you need some front weight allright, you need two M's bolt the second one on the front of the first. What you need is a bigger machine to start with.



[Log in to Reply]  [No Email]
bill Thomas

01-02-2004 15:00:40




Report to Moderator
 Re: Re: Re: Re: M or MT 3point hitch new design in reply to Van, 01-02-2004 12:15:31  
I believe you hit the nail on the head.



[Log in to Reply]  [No Email]
Mike M

01-02-2004 04:58:19




Report to Moderator
 Re: Re: M or MT 3point hitch new design in reply to Richard, 01-02-2004 02:32:48  
This machine is too light to move round bales! Unless you have the small old time Allis Roto Baler ?



[Log in to Reply]  [No Email]
Richard

01-02-2004 02:21:15




Report to Moderator
 Re: M or MT 3point hitch new design in reply to Bill Thomas, 01-01-2004 22:48:48  
Yes, I'm interested dependsnt on price & getting details.



[Log in to Reply]  [No Email]
Bill Thomas

01-02-2004 06:09:08




Report to Moderator
 Re: Re: M or MT 3point hitch new design in reply to Richard, 01-02-2004 02:21:15  
We will have pricing established when we settle on the quantity to have built and get some bids on manufacturing. If you want a picture of our prototype just send me an email with three point in the title and as soon as I get pictures I'll send some. We still have a few hours of work left to complete, and since my son and I both work full time jobs with different schedules it make take a few weeks before we get back together to finish it up. I like to test my designs in every way possible before I turn it loose. If you are going to do it at all you should do it right. Thanks for the interest!

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy