Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Clooney I figured it out

Welcome Guest, Log in or Register
Author 
peter

01-01-2004 14:15:20




Report to Moderator

r.e. starter, the reason it was dragging is the armature was broke in two under starter drive, found a new one in garage and it seems to work great, thanks for imfo. Peter in Michigan P.s. where can I get replc. parts for starters , starter shop and parts stores are not real cooperative because they will lose business from me also would like a growser thanks again Peter




[Log in to Reply]   [No Email]
tom

01-02-2004 18:04:17




Report to Moderator
 Re: Clooney I figured it out in reply to peter, 01-01-2004 14:15:20  
Peter,

Here is an outfit in Houston that is a Delco Remy autorized dealer--they have helped me restore both my DR Starter and DR 6V 3 brush generator back to it original condition - ask for a guy named Henry.

Here is the info: Tracy Electric Supply Inc, (713) 675-3981, 4851 Homestead Rd, Houston, TX 77028

good luck,
tom



[Log in to Reply]  [No Email]
Clooney

01-02-2004 05:41:37




Report to Moderator
 Re: Clooney I figured it out in reply to peter, 01-01-2004 14:15:20  
Peter, a lot of those parts are still available from Deere but are quite expensive. There are starter shops out there that will sell to you like Ken at classic generator [Phone: 817-473-1448] E-Mail..... [email protected]

~You might even get some of the simpler parts from your local auto parts store..

~I usually just buy a used starter from a tractor junk yard & use the parts from that as that is usually the cheapest way to go.

~I you are from Michigan you might try Owosso Tractor Parts 1-888-530-4554,,, or Taylor Equipment 1-800-368-3276,, or Stamm Equipment 269-729-6204.....

~If you can find a Delco electrical supply house near you they can also supply some of the parts..

~On the growler?.. Those are hard to come by but if you look long enough you can find one.. Try old service station sales & old truck repair shop sales & auctions..

[email protected]

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy