Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Babbit Bearing Material, anyone pour thier own??

Welcome Guest, Log in or Register
Author 
bryani289swmi

12-30-2003 18:51:25




Report to Moderator

We've poured several in the past but just trying to get some information on the babbit materials that others use. We've used stuff form Grainger or McMaster-Carr previously with good results but always interested in improving our methods and materials. Thanks.

Bryan




[Log in to Reply]   [No Email]
HAVVEY

12-30-2003 20:11:12




Report to Moderator
 Re: Babbit Bearing Material, anyone pour thier own in reply to bryani289swmi, 12-30-2003 18:51:25  
IVE DONE SAW SHAFTS ROD BEARINGS ARE MUCH MORE DIFFICULT HOT METALS ARE ALSO DANGEROUS MY COUSIN ALMOST GOT IT GOOD (WATER IN THE MATERIAL) AN OUTO SHOP PURED THEM WITH SPECIAL JIGS AND LINE BORED THEM DONT KNOW ABOUT THE FLANGE TYPE



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy