TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

JD A head gasket

Welcome Guest, Log in or Register

Author

steve II JD4000

10-21-2002 17:54:14

Report to Moderator

I am ready to put the head on the A. the gasket I have got from JD dealer. on one side of gasket has silver other side is not. What side goes on block and side goes to head? Do I put High Tack on gasket? both side? Manifold gasket has silver side and other not, what end up or down?
Need to know lps feet on Nuts for head and block and rods. manifold?? Thank you .

Steve II

[Log in to Reply] [No Email]

Village Blacksmith

10-21-2002 19:57:09

Report to Moderator

Re: JD A head gasket in reply to steve II JD4000, 10-21-2002 17:54:14

Head Gasket---Smooth side to block
Manifold Gasket---Metal (silver side) Up
Rod Bolts-100 Foot Pounds
Head Bolts-125 Foot Pounds
Block Bolts-Long Wrench--Stand on it. (Probably 250 foot pounds, but not stated in book)
Manifold--7/16 bolts--probably 70 Foot Pounds, but not stated in the Bible.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy