Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

3020 head gasket replacement

Welcome Guest, Log in or Register
Author 
GLenn

07-07-2002 19:05:55




Report to Moderator

I am not a mechanic and will be replacing the head gasket on a 3020 gas, a 1968 I beleive.It is also a power shift.Torque spec's? Any thing out of the ordinary, any tricks or problems? (S.W. PA) Glenn




[Log in to Reply]   [No Email]
G-MAN

07-08-2002 07:42:59




Report to Moderator
 Re: 3020 head gasket replacement in reply to GLenn, 07-07-2002 19:05:55  
First and foremost, get the proper service manual. I'm a JD technician and I don't even do jobs like this without the proper book at hand, even though I've done many in the past. The manual will have the proper specs and procedures. I would also get the head checked for flatness and check liner protrusion - head gaskets don't just fail for no reason, and there is probably something wrong that a new gasket will only be a band-aid for, until if fails again.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy