Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Head For 1951 A

Welcome Guest, Log in or Register
Author 
Nip

05-17-2002 06:08:57




Report to Moderator

I just found out from the machine shop that not only is my head cracked but it needs new valves, seats, guides, and springs. Any suggestions about what type of head I should be looking for. I want to pull it and have already bought(and installed)a set of M&W pistons. Thanks ahead of time.




[Log in to Reply]   [No Email]
SEAMO

05-17-2002 17:22:29




Report to Moderator
 Re: Head For 1951 A in reply to Nip, 05-17-2002 06:08:57  
I dont think Jerrys head is legal to pull everywhere. It was not a production head like heisler. We dont ok either in ILLinois only the Heisler manifolds in ITPA



[Log in to Reply]  [No Email]
rusty

05-17-2002 08:34:06




Report to Moderator
 Re: Head For 1951 A in reply to Nip, 05-17-2002 06:08:57  
If you are just wanting to do some stock or Div 2 pulling, another cyclone (stock) head would be fine with shaving it down .125 or so, but for more compression on a stroked A buy a heisler or an A head from Jerry's Machine in KS



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy