Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

JD Styles D height

Welcome Guest, Log in or Register
Author 
Larry

04-16-2002 19:58:04




Report to Moderator

I am going to bring home a styled model D but I need to know how high it is to the top of the exhaust pipe. I may need to enlarge the shed!




[Log in to Reply]   [No Email]
Clooney

04-17-2002 13:54:00




Report to Moderator
 Re: JD Styles D height in reply to Larry, 04-16-2002 19:58:04  
Larry, my earlier "D" is 86.75" to top of intake stack with 16.9 X 28 new rubber on the rear. ~Unstyled D with steel & 5" rear lugs & ft guide bands is 87.25" to top of intake stack.
~You will have to judge the exhaust height from the intake stack height as most of the D's with straight pipes can very some. ~Unless your styled has cut-offs on it, the rears they will probably be 30" rims but the height won't be too far off the 28" rims
~My D's won't clear my 7' garage door on my garage without pulling the intake & exhaust stack. So they have to go in one of the barns or have the stacks pulled.

[Log in to Reply]  [No Email]
Kirk in PA

04-17-2002 08:46:10




Report to Moderator
 Re: JD Styles D height in reply to Larry, 04-16-2002 19:58:04  
Larry:

Seems to me that my '48 D just fits through a 7 foot garage door opening. I'm not sure if the stack has ever been cut off, but I don't think so.

Good luck



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy