Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Help with PS Pump Seals

Welcome Guest, Log in or Register
Author 
POPPER DICK

04-15-2002 11:10:54




Report to Moderator

I am replacing the seals in my 620 power steering pump. The parts book has a sub with two seal and one spacer to the rear seal installation. Does the spacer go in between the two seals or in the bottom of the seal race before the two seals go in?

Thanks in advance

Dick




[Log in to Reply]   [No Email]
POPPER DICK

04-15-2002 12:07:49




Report to Moderator
 Re: Help with PS Pump Seals in reply to POPPER DICK, 04-15-2002 11:10:54  
Frank,

Thanks for the diagram. Question - When I removed the old seals, the open side of the seal was up. Your diagram shows the closed side of the seal up. Do you think this makes a difference?

Thanks in advance

Dick



[Log in to Reply]  [No Email]
Frank-in-Tallahassee

04-15-2002 11:44:20




Report to Moderator
 Re: Help with PS Pump Seals in reply to POPPER DICK, 04-15-2002 11:10:54  
third party image

Popper Dick:

I hope this picture will help. I don't know why but the 530 book shows the two seal/spacer arrangement.

Frank-in-Tallahassee
70D // 855



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy