Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

John Deere 5020 with 903 Cummins

Welcome Guest, Log in or Register
Author 
Richard Pruitt

03-19-2002 13:27:27




Report to Moderator

Hello

A guy that lives down the road from me purchased a 5020 John Deere and because it lacked horsepower he put a 903 cummins in it. One of the guys that used to work for him said he could pull 6-18 moldboards in 6th gear!!! He sold the tractor and the people that he sold it to they just put it in an consignment auction and it brought $5300.00.




[Log in to Reply]   [No Email]
To Denny Frisk

03-20-2002 15:40:30




Report to Moderator
 Re: John Deere 5020 with 903 Cummins in reply to Richard Pruitt, 03-19-2002 13:27:27  
You say the 619's are no good?? Well we have an 8760 with just shy of 11000 hours and the only thing done to the engine was service at 150hrs always ran deere oil and filters. Only problem we have ever had with it is changed a rear crank seal around 5000 hrs. This tractor does heavy tillage and packs on a bunk silo. As for you Cat and Deere track situation. If Cat's challenger is so good then why did they sell to agco. I happen to work for a JD dealer and the head salesman happens to be my brother in law. he showed me a paper about it and when cat started the challenger they had 100% market and in 2001 they had less than 20% must have been a great machine huh???

[Log in to Reply]  [No Email]
Denny Frisk

03-21-2002 10:17:19




Report to Moderator
 Re: Re: John Deere 5020 with 903 Cummins in reply to To Denny Frisk, 03-20-2002 15:40:30  
Glad you had good luck with Your 8760... but I don't think that tractor has the 531 or 619 engine like the 5010,5020,6030,8630 or8640 does it? At some point Deere changed engine styles and That's what your tractor probably has. Deere also learned some things about mounting the engines in their tractors too. CAT's biggest problem is/was the fact their Challanger series is so expensive... but they have the dealer network, the parts support, and a group of even more devoted customers than you Deere People....I've never heard anyone say a bad word about them.... and they get a LOT of repeat customers. Is the C/IH Quadra-Track the second largest seller according to the paper Your B-i-L showed You? To get back on track, I've driven sevaral different types of trucks, 10 wheel cement trucks & 18 wheel semi's with V-8 Cummins.... 555 and 903's.... I would think a 5020 with a 903 would be a nice tractor to run... Lot better (quieter) than a 5020 with a noisy Detroit.

[Log in to Reply]  [No Email]
Disturbed 1066

03-20-2002 11:40:24




Report to Moderator
 Re: John Deere 5020 with 903 Cummins in reply to Richard Pruitt, 03-19-2002 13:27:27  
there is a 5020 in a salvage yard in elkhart,in with a v-6 detroit I thought that improved a pig of a tractor like the 5010 or 20. just my .02 cents



[Log in to Reply]  [No Email]
Handsome Jim

03-20-2002 05:59:08




Report to Moderator
 Re: John Deere 5020 with 903 Cummins in reply to Richard Pruitt, 03-19-2002 13:27:27  
I hope that Come along peforms better in farm tractors than the trucks it was designed power down the road. We had a couple of dump trucks with those heart breakers under the hood, We called them 9-0-nuthins. They might sound like bad boys, But I'll take an old fashioned inline any day.



[Log in to Reply]  [No Email]
Shawn

03-19-2002 19:58:39




Report to Moderator
 Re: John Deere 5020 with 903 Cummins in reply to Richard Pruitt, 03-19-2002 13:27:27  
Hello,
I few years ago my neighbor bought one out of iowa and brought it to illinois to farm with it, it has a big V-6 Detriot, with 30.5 X 32 rear tires, painted up real sharp dual stainless steel stacks, boy i sure loved that tractor it was loud and neat, just right up my alley, but after about 2 years he sold the tractor and quit farming, dont know where the tractor is now, i think winsconsin but not sure, but if i had the money and a tractor like that showed up on a sale i might just hafta buy it, if i had that i think i could pull my 8-16 plow better then my 7240 case can.
just my thought,
Shawn

p.s. I was told that the 531 and 619 JD engines were junk anyway, so i dont know what the big deal about a cummins or a detroit would be, but then again i have never had a 531 or 619

[Log in to Reply]  [No Email]
It's not so!!

03-20-2002 05:29:52




Report to Moderator
 Re: Re: John Deere 5020 with 903 Cummins in reply to Shawn, 03-19-2002 19:58:39  
Most of the bad things you've heard about JD 531 or 619 engines are pure Jon Kinzenbaw propaganda. I'm not going to say they didn't have some problems, but Kinze has bad-mouthed Deere and Deere products for so long, some idiots actually believe him--- he's made a bunch of money putting Detroits and Cum-a-parts in JD tractors---then he wonders why he's not well thought of in the JD collecting community!!!

[Log in to Reply]  [No Email]
Denny Frisk

03-20-2002 09:41:26




Report to Moderator
 Re: Re: Re: John Deere 5020 with 903 Cummins in reply to It's not so!!, 03-20-2002 05:29:52  
Well, That's Your opinion.... John Had an opinion about some things and did more than post a note on a computer bulletin board.... and obviously MANY people agreed with him and made Him very wealthy.. I've seen a LOT of 4010/4020 and 5010/5020's with Detroit's.... Never seen a 903 Cummins in one before..... But I suppose if the 5020 that sold had the 955 CID Deere Clone of the 903 it would be cool Huh? I also bet if You had a late model 8640 with a blown engine and your Deere dealer told you it was $25,000 for a new engine, You'd think about John's Cummins conversions pretty hard too. Whether it was the design fault of the frame or the engine wouldn't matter to me... I think John's research said that about 65% of the 531/619 engines had been replaced thru deere dealers, didn't matter what model of tractor it was in....2WD Or 4WD.

[Log in to Reply]  [No Email]
G Taylor

03-20-2002 10:44:11




Report to Moderator
 Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to Denny Frisk, 03-20-2002 09:41:26  
I don't see why $25,000 has to be spent on a 531 or 619. People who paid that may already own swamp land in Florida . A fresh JD engine can be had for much less & it isn't rocket science to drop one in once the 4WDframe is braced. Any other manufacture ever make any design error in the past 40 years. Some red tractor transmission/rear ends come to mind. As for Jon or John Kinze, he has done alot of business with people bitter over the fact Deere is still around. But their Dad's & Granddad's favourite brand is gone or multiple merged. They will purchase anything but JD, just look at his planter/equipment business cloned from Deere.

[Log in to Reply]  [No Email]
Denny Frisk

03-20-2002 12:22:34




Report to Moderator
 Re: Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to G Taylor , 03-20-2002 10:44:11  
$25,000 was the price of a new 619 engine in the crate installed in a 4WD tractor... Parts & labor. The way the news papers in the Quad-Cities explained the Kinze vs Deere thing on the planter business it was "restraint of Trade" by Deere.... Plus Deere must have been guilty... After Kinzbaugh filed His counter-suit against Deere all of a sudden Deere could make them all the row units Kinze needed. Kinzbaugh had ordered MORE row units for His toolbars than Deere marketing thought they could sell for that year... All of a sudden Deere couldn't make enough for themselve let alone Kinze. Another story I just heard.... and this is only 2nd hand.... Kinze was building the row units FOR DEERE already.... so they knew who the suppliers were already....They just ordered some of the parts painted black or molded white....Want to discuss corn head design... Hex vs Square drive shafts for row units? Anyone ever heard any more about CAT suing Deere for patent infringement on track type tractors? Did Cat selling the Challanger line to AGCO end that suit? Having lived in the Quad-City area for 35 yrs I know a LOT about Deere....even with the Moline Dispatch newspaper's biased coverage of anything to do with Deere.

[Log in to Reply]  [No Email]
If you don't like Deere, why do you post here?

03-21-2002 14:24:27




Report to Moderator
 Re: Re: Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to Denny Frisk, 03-20-2002 12:22:34  
Mr. Frisk, if you don't like Deere, then perhaps you would find a better home for your negative comments about Deere somewhere else. Maybe you should start a website praising the (dubious) accomplishments of Mr. Kinzenbaw, or perhaps a "I Hate John Deere" site. No doubt you'd attract a number of malcontents like yourself.



[Log in to Reply]  [No Email]
G Taylor

03-20-2002 14:54:06




Report to Moderator
 Re: Re: Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to Denny Frisk, 03-20-2002 12:22:34  
As a Mega Corporation in highly competive lawyer infested world I'm suprised Deere hasn't played more dirty pool than they have. As for the 531's & 619's requiring rebuilds, they are approaching 40 & 27 years respectively. Even at a modest 500 hrs per year many are just worn out. Add to that engines ruined without proper service. A dribbling injector(s) or plugged/ripped airfilters are items missed by some owners of every make.Missed oil changes, condensation in lube oil and old dirty fuel are too common as well. As far as Cat & Deere, they have been quarreling lovers since the 1920's.

[Log in to Reply]  [No Email]
Denny Frisk

03-21-2002 10:05:48




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to G Taylor , 03-20-2002 14:54:06  
These engine failures were happening when the engines only had a thousand hours on them, just out of warranty. That's when the repower kits were popular. I thought You knew that. We're not talking worn out engines.... We're talking Catastrophic failures.... I've had a running E-mail chat with a friend of mine that worked at Deere in Waterloo until about 5-6 months ago. E-mail Me at [email protected] and I'll forward HIS thoughts on the matter. Basically they support BOTH Our thoughts on the matter. Remember when ALL the big Deere 4X4's were catching on fire? FARMSHOW Magazine featured that for a few issues too. dry corn debris blowing inside the engine compartment and accumulating next to the exh. manifold.... I think Deere made a screen to cover that area on the affected tractors.

[Log in to Reply]  [No Email]
Leon S.

03-22-2002 13:43:49




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to Denny Frisk, 03-21-2002 10:05:48  
Mr. Frisk; You will find Taylor runs his mouth a lot and most of the time doesn't have any idea what he is talking about. Most of us don't pay any attention to him and his off the wall double talk.



[Log in to Reply]  [No Email]
John

03-22-2002 14:00:36




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to Leon S., 03-22-2002 13:43:49  
I think you'll find that Mr. Taylor's comments are more knowledgable and informative than Mr. Frisk's or yours are!!!



[Log in to Reply]  [No Email]
Leon S.

03-22-2002 15:28:23




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to John, 03-22-2002 14:00:36  
WOW! you must be his brother in law or have an IQ of 40 to be impressed by his double talking and rantings. You can't be very smart or you would know how to post your e mail address.



[Log in to Reply]  [No Email]
Tye

03-20-2002 08:54:56




Report to Moderator
 Re: Re: Re: John Deere 5020 with 903 Cummins in reply to It's not so!!, 03-20-2002 05:29:52  
Who is Jon Kinzenbaw?



[Log in to Reply]  [No Email]
Jim

03-20-2002 07:23:05




Report to Moderator
 Re: Re: Re: John Deere 5020 with 903 Cummins in reply to It's not so!!, 03-20-2002 05:29:52  
The reason that the 8630's and 8640's are selling so cheep is because of there lack of a reliable engine.



[Log in to Reply]  [No Email]
G Taylor ....engine is fine, mounts are wrong

03-20-2002 09:21:15




Report to Moderator
 Re: Re: Re: Re: John Deere 5020 with 903 Cummins in reply to Jim, 03-20-2002 07:23:05  
The reason for 619 failures in the articulated four wheel drive 30 & 40 series is chassis twist. Somewhere along the way the tractor engineers decided to use the engine block & head as a structural member.The engine wasn't built to be used as such but bolted to mounts or rigid frame rails. Your automotive or truck engine doesn't bear any vehicle weight either. When the 4WD chassis gets heavily loaded, the crankshaft is trying to rotate while following a curved path. Gaskets are trying to seal and pistons running in bores no longer round. Doesn't work worth a darn. When re-engined the replacement is properly supported and avoids that issue. Probably Deere's 1st serious goof since the 2010.

[Log in to Reply]  [No Email]
ET

03-19-2002 18:09:34




Report to Moderator
 Re: John Deere 5020 with 903 Cummins in reply to Richard Pruitt, 03-19-2002 13:27:27  
About 25 years ago I saw an ad for an outfit that made retro fit kits for 5020's to install the 903 cummings or a detroit engine. This is the first I have ever heard of one. The ad said gears 1 through 3 were blocked out as part of the retrofit. Those engines sure would cure the poor power to weight ratio of the 5020 or 5010, but it would take some big rubber to hook it down.



[Log in to Reply]  [No Email]
G Taylor

03-19-2002 17:38:05




Report to Moderator
 Re: John Deere 5020 with 903 Cummins in reply to Richard Pruitt, 03-19-2002 13:27:27  
Wonder why your neighbour didn't spend less money & just purchase a 6030 which was built to make the desired HP? Even a JD 531 turbo or 619 turbo in the 5020 would have boosted power plus it wouldn't be a off brand transplant causing serious devaluation.



[Log in to Reply]  [No Email]
JD70Jim

03-19-2002 16:44:00




Report to Moderator
 Re: John Deere 5020 with 903 Cummins in reply to Richard Pruitt, 03-19-2002 13:27:27  
That is interesting! I have a theory that older, well used, high horsepower tractors bring LESS than their smaller, STOCK, brethren, whether they are Red, Orange, Yellow, Blue or either shade of Green.

Has anyone noticed whether between two otherwise identical 4020s, would one with an M&W Turbo kit bring less, or more? I would say less! 4520s and 4620s regularly bring LESS than same vintage 4020s bring! I know of a local JD Dealer which has a 4520, with cab,less than 6000hrs(I think) and in decent shape for under $8000. A 1969-70 4020 would bring over $10,000 and usually a dealer would ask over $12,000!

Going back to the butchered 5020, I have watched original 5020s bring $6500-9500. 5020s aren't all that popular anymore, anyway, due to their bulk and the fact that they arn't as nimble as newer, lighter tractors in that hp range. I think that the $5300 was reasonable under the circumstances.

[Log in to Reply]  [No Email]
JDGnut

03-19-2002 20:38:48




Report to Moderator
 Re: Re: John Deere 5020 with 903 Cummins in reply to JD70Jim, 03-19-2002 16:44:00  
Most of the 4520's and 4620 bring less than the 4000, 4020, and 4320's was because of the 540 pto in the smaller tractors.. It just makes it easier to sell and more verasitle...
JDGnut



[Log in to Reply]  [No Email]
TO: Who Cares

03-19-2002 16:29:12




Report to Moderator
 Re: Re: John Deere 5020 with 903 Cummins in reply to Who cares?, 03-19-2002 16:09:41  
Dear Who Cares, You are ignorant. Richard was posting information he wanted to share with all of us on this board. If you thought this was wasted space you should have moved on.



[Log in to Reply]  [No Email]
Who Cares?

03-19-2002 16:51:26




Report to Moderator
 Re: Re: Re: John Deere 5020 with 903 Cummins in reply to TO: Who Cares, 03-19-2002 16:29:12  
Oh, I see---only YOUR opinion is worth posting, right? You should see if you can get a job as a board moderator or censor---you'd be good at it!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy