Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

John Deere #52 plow: Paint and Dates

Welcome Guest, Log in or Register
Author 
Tye

03-19-2002 04:58:51




Report to Moderator

Can anyone tell me the paint code for a John Deere #52 plow? What to paint green and what to paint yellow? Also, when was the #52 in production? Thank you for any help.




[Log in to Reply]   [No Email]
Stan - Florida

03-19-2002 12:24:36




Report to Moderator
 Re: John Deere #52 plow: Paint and Dates in reply to Tye, 03-19-2002 04:58:51  
As I remember our No. 52 plow, it was all green and the tail wheels were either yellow or green, but I'm not sure why there was an option there. I hope you get an answer that doesn't depend on a fuzzy memory, however.

The production years were 1934 to 1947, and the beam numbers tell which years, as follows:

610...short beam, 14 inch, 1934
611...long beam, 14 inch 1934
612...short beam, 10, 12, 14, 16 inch 1935-'47
613...long beam, 10, 12, 14, 16 inch 1935-'47

Stan

[Log in to Reply]  [No Email]
Forgetful Stan - Florida

03-19-2002 12:30:08




Report to Moderator
 Re: Re: John Deere #52 plow: Paint and Dates in reply to Stan - Florida, 03-19-2002 12:24:36  
The wheels were yellow, and there are probably some silver colored areas (moldboards, landsides, rolling coulters), but they may have been green when the plow was first delivered.

Stan



[Log in to Reply]  [No Email]
Tye

03-19-2002 15:44:57




Report to Moderator
 Re: Re: Re: John Deere #52 plow: Paint and Dates in reply to Forgetful Stan - Florida, 03-19-2002 12:30:08  
Do you measure the width between the beams from inside to inside or outside to outside?



[Log in to Reply]  [No Email]
Stan - Florida

03-19-2002 17:35:56




Report to Moderator
 Re: Re: Re: Re: John Deere #52 plow: Paint and Dates in reply to Tye, 03-19-2002 15:44:57  
I think you should measure from the outside of one beam to the inside of the other. In other words, from the right side of one to the right side of the other. I sure hope that is right and makes sense.

Stan



[Log in to Reply]  [No Email]
Bob Collins

03-20-2002 06:05:58




Report to Moderator
 Re: Re: Re: Re: Re: John Deere #52 plow: Paint and Dates in reply to Stan - Florida, 03-19-2002 17:35:56  
That's right Stan, It's easier to show than to explain but you hit it right. bob



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy