Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Steel wheel plow point WANTED

Welcome Guest, Log in or Register
Author 
A-C Don

03-10-2002 16:41:34




Report to Moderator

I would like to thank all of you for helping so far on this old plow. It really looks sharp, got the final coat of green on and one more coat of yellow should do it. I still need a plow point, does anybody have one in michigan? Does anyody know how much they cost? thanks again, Don




[Log in to Reply]   [No Email]
Drew s/w WI.

03-11-2002 04:28:43




Report to Moderator
 Re: Steel wheel plow point WANTED in reply to A-C Don, 03-10-2002 16:41:34  
Hello Folks: If someone out there is parting out a #51, I need some parts. landside and bushing on axle. Please email me Thanks in advance Drew sw WI.



[Log in to Reply]  [No Email]
ET

03-10-2002 16:49:03




Report to Moderator
 Re: Steel wheel plow point WANTED in reply to A-C Don, 03-10-2002 16:41:34  
We need to know what bottom is on your plow? Pull off the old point and tell us what numbers are on the back.



[Log in to Reply]  [No Email]
A-C Don

03-10-2002 16:58:07




Report to Moderator
 Re: Re: Steel wheel plow point WANTED in reply to ET, 03-10-2002 16:49:03  
It is not the original point, it says Moore plows on the back. The plow itself says John Deere 614 on the I beam, the plow is one bottom. Hope this helps guys. Don



[Log in to Reply]  [No Email]
Will P

03-10-2002 18:19:30




Report to Moderator
 Re: Re: Re: Steel wheel plow point WANTED in reply to A-C Don, 03-10-2002 16:58:07  
That is a #51 one bottom plow. Is it a 14", 16" or 18" plow?

Will P



[Log in to Reply]  [No Email]
A-C Don

03-11-2002 17:16:52




Report to Moderator
 Re: Re: Re: Re: Steel wheel plow point WANTED in reply to Will P, 03-10-2002 18:19:30  
It is a 14 inch Will. thanks, Don



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy