Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere M
:

to buy or not?

Welcome Guest, Log in or Register
Author 
Sea Chavers

01-30-2002 17:29:35




Report to Moderator

Can buy a '49 JD M for $2000. Has been converted to 12 volt, has wrong decals, good paint, good rubber and starts and runs pretty good. Would like to know if it is worth the asking price before I spend the time to go check it out in detail. Is there a market out there for the M if I decide to sell it later (assuming I buy it)?




[Log in to Reply]   [No Email]
Steamer

01-31-2002 08:18:16




Report to Moderator
 Re: John Deere M - to buy or not? in reply to Sea Chavers, 01-30-2002 17:29:35  
Hi,

Pricing always depends on area, which is to say, local demand. Around here (Raleigh, NC) an M for $2k would practically evaporate, it'd sell so fast. Lots of demand for small utility tractors make it that way.

The conversion to 12v is actually a blessing. I have an M and a 420c that are still 6 volts and they can be a pain to get started sometimes. I also have a 430w that is converted to 12v, which is much better. Plus, it can be used more after dark as the new electrical capacity can run more than the measly two lights on my M (one front and one rear don't light things up much).

Don't worry about the paint and decals too much. That can always be redone if you want a show tractor. Heck, I did up my M to go to shows and deliberately painted it in the 420 scheme (yellow stripe) and used the later font for 'John Deere' on the hood, although I kept the original font for the 'M' on the grille. You can see a photo of it in my Tractor Town entry on this board. Look for Steamer.

Anyway, I painted it this way because I think the yellow stripe looks a lot better than the all-green scheme. My 420c is original, right down to the paint and when it goes to shows it stands out because the green has darkened considerably and the yellow has become almost white. Everything is straight and clean and she runs remarkably well still. The crawlers don't show up often, and when they do they tend to be twisted and worn in lots of places, but have a beautiful new paint job. It makes for an interesting contrast.

The 430w is still a mess. Bent tin. Faded paint (when you can find it for the dirt encrusted oil over everything). Old tires, none of which match. She burns a little oil (looks like an 820 that's still cold from the smoke it puffs at idle), but starts right up every time. Since this one has live PTO, it gets used for the lighter tasks, like mowing the grass.

Maybe the 430w will get some attention soon, as I have a 2-year old 4500 as well, so the 430 doesn't have to so all the work any more. Hey, if you live near Raleigh, I'll sell you a live PTO 430w for $2000, which is the same price as the M you're looking at. :-)

The whole point is if it runs OK and can do what you need done it's a good machine regardless of minor modifications or paint.

Stan

[Log in to Reply]  [No Email]
this post for Steamer

02-01-2002 12:52:37




Report to Moderator
 Re: Re: John Deere M - to buy or not? in reply to Steamer, 01-31-2002 08:18:16  
Steamer, have you ever thought of trying an 8 volt battery in your 'M'? I'm not familiar with M's but we use 8 volts in our old A's & B's. Gives you more cranking power in the winter! You can get them at auto parts stores, they usually have to order them (we get ours the next day).. TSC or some other tractor supply should have them.



[Log in to Reply]  [No Email]
Handsome Jim

01-30-2002 17:59:26




Report to Moderator
 Re: John Deere M - to buy or not? in reply to Sea Chavers, 01-30-2002 17:29:35  
If it's everything that you say, two grand ain't a bad price for a M depending where you are located. I've seen them go a lot higher and in not as good of shape as the one you are looking at. Decals are no big deal, if you want it to make it look more authentic, you can get the correct ones from Jorde's for less than $70.00. He'll probably be able to tell you how to get the wrong ones off. I hope you get your tractor, good luck.HJ

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy