Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Dumb Question on PTO Shield

Welcome Guest, Log in or Register
Author 
Dave

11-28-2003 18:21:14




Report to Moderator

First my 1944 B did not come with a PTO shield, I finally tracked one down. Do you have to take all four bolts out every time you wanted to put the spring loaded flipper guard up or down?




[Log in to Reply]   [No Email]
Ron

11-28-2003 19:07:09




Report to Moderator
 Re: Dumb Question on PTO Shield in reply to Dave, 11-28-2003 18:21:14  
You don't Ever want to put that "Flipper" down..!! It will Just RATTLE, and you will put it up, again..!!! It is a Safety, meant to drop down, if the shield should ever come off....

AND...WHY are there so many tractors with NO shield....!!! Where did they all go..?? Did nearly everyone let their equipment fall apart..??? We didn't...guess many did...!!



[Log in to Reply]  [No Email]
720Deere

11-29-2003 04:32:51




Report to Moderator
 Re: Re: Dumb Question on PTO Shield in reply to Ron, 11-28-2003 19:07:09  
I am way too young to have been around when the 2-cylinders were in their prime, but I definetly know the old farmer mentality. Those pto shields were just in the way and must have been designed by some city slicker that never ran a tractor. I have a feeling that most of those shields got tossed into a corner the first time they hooked something to the pto. Have you ever seen the corner of most farm shops? Next thing you know it's cleanup time and those shields went to the scrap yard!

[Log in to Reply]  [No Email]
Ralph

11-29-2003 09:12:32




Report to Moderator
 Re: Re: Re: Dumb Question on PTO Shield in reply to 720Deere, 11-29-2003 04:32:51  
Not all farmers behaved in that fashion. When I was 6 and crawled up on our new '41 B to pretend, I was not allowed to step on the power takeoff shield. The guys that threw shields away were soon limping. I left the farm in the 50's and there were usually enough farmers with one hand or a gimpy leg around to cause the the rest to treat shields with reasonable respect. Few farmers had tools capable of removing the integral shield of the 14T baler. In my opinion things got worse when townsfolk without a farm background moved to their new hobby farm and suppled it with cast off and incompatible (i.e. the shield didn't fit) equipment.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy