Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

John Deere B or Ford 2N

Welcome Guest, Log in or Register
Author 
RussJ

10-21-2001 08:25:17




Report to Moderator

Which is a beeter tractor for light duty small farm work and snow plowing? Which tractor is worth more?
Thanks for the comments




[Log in to Reply]   [No Email]
Putt Putt

10-25-2001 06:22:58




Report to Moderator
 Re: John Deere B or Ford 2N in reply to RussJ, 10-21-2001 08:25:17  
Russ----- ---

Boy, this sure sounds like an argument that my Dad and I had some 40 years ago! I have Deeres and one Ford. For snow removal, per se, I recommend the more nimble Ford. Fords are great for 3 point use. And with the vast array of 3 point implements available they are great little tractors.

Size for size the Ford (using non integral implements) can�t match the traction (read pulling) of a comparable Deere. I also rate the John Deere more durable. Of course there�s the charm of all of Deere�s eccentricities (the sound, hand clutch, and on and on. You�ll pay 1 � to 2 times as much (in my area) to get into the Ford as a John Deere B. Industrial, construction, commercial people love �em as do suburbanites and week end warriors. They really run the prices up. On the other hand, you can expect more back from a Ford, should you sell, later.

If you can afford to move up half a tick, I think a more interesting match would be between the Ford Jubilee and John Deere 50. Here you may find live PTO and hydraulics and, on the Deere, Power Steering. A much more useful setup.

Or---- try this on for size. For under a thousand dollars you can find an old �beater� 4x4 pickup, complete with snow blade. It may be a sorry looking affair, but you�ll stay warm and dry and move a heck of a lot more snow than with either tractor. You�ll save enough to start on the way to whichever tractor strikes your fancy.

Have fun!!

[Log in to Reply]  [No Email]
Denny Frisk

10-23-2001 14:40:22




Report to Moderator
 Re: John Deere B or Ford 2N in reply to RussJ, 10-21-2001 08:25:17  
Actually, I'd buy a FARMALL Super H, 300 or 350. Then You'd get Live Hyd, LPTO(300&350 only),Power steering if Your lucky and as much power as both the B and 8N combined.



[Log in to Reply]  [No Email]
Fred

10-23-2001 11:40:30




Report to Moderator
 Re: John Deere B or Ford 2N in reply to RussJ, 10-21-2001 08:25:17  
Which color do you prefer? Actually the 2N is handy with its low profile. I was raised on old JD's and now own an 8N. It is really handy around the place. I use it for buzzing wood, plowing snow with a JD 45 blade, and general stuff. I do like the putt putt of the old JD's! Take your pick. Whatever you decide will not be just a tractor but will become your legacy to your neighborhood.



[Log in to Reply]  [No Email]
Chuck

10-22-2001 04:52:47




Report to Moderator
 Re: John Deere B or Ford 2N in reply to RussJ, 10-21-2001 08:25:17  
both tractors are inferior for snow plowing and are primitive for other features as well. A late model front wheel assist is the tractor to have for the snow plowing, and if you get the B, be careful expecially on ice.



[Log in to Reply]  [No Email]
wier

10-21-2001 22:01:47




Report to Moderator
 Re: John Deere B or Ford 2N in reply to RussJ, 10-21-2001 08:25:17  
both are great little tractors. the 2n and early b are both pretty primitive. for snow plowing and most farm work live hydraulics, live pto, and depth control on the 3 point are nice to have. with the 2n and i think most b's you have neither.

my advice, am no expert but have a model 50 jd and an 8n ford, i would get an 8n, that will give you depth control on your 3 point, pto that is not live, but no hydraulic remotes, or a b with live hydraulics, pto, and rocker arms for an aftermarket 3 point. the fords are alot easier to drive if you are not used to jd's hand clutch. more like a manual shift auto.

BUT, if you want to get hooked, spend alot of money on every green tractor your wife will not divorce you over, spend all your spare time here reading the archives, and in general turn into one of us weirdo's with John Deere tractor mail boxs, by all means buy the B.

[Log in to Reply]  [No Email]
Dave 2N

10-21-2001 16:10:56




Report to Moderator
 Re: John Deere B or Ford 2N in reply to RussJ, 10-21-2001 08:25:17  
Depends on what you are going to do and what equipment you are going to do it with. The Ford has 3 pt. hitch and is a handy tractor. The B is larger and you can add a 3 pt. hitch, or use pull behind, hydraulic cylinder-controlled impletments. If a guy had a B with a JD N0. 9 (I think it's the model) snow blade, he's got a great snowplowing outfit since the blade is in front. N's will plow snow well too but most have rear monted blsdes that require looking over your shoulder. Is your land flat or do you live on hills? Lots of things to consider here. Which one is worth more??? N's cost more but prices are inflated; you can probably find a half-way decent B for no more than $1800.00. I owned a B for 15 years and did a lot of work with it but my work needs changed so I sold it. I now have a 2N and a Farmall Super C which are my main work tractors; also have a JD 70 restored and have it for fun. So, both the B and the N are good tractors but to tell you which one is the better choice is like comparing apples to oranges.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy