TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum

setting wheels for plowing

Welcome Guest, Log in or Register

Author

arnie1968

11-23-2003 18:14:34

Report to Moderator

I have a 720. Just recently purchased a Jd 4-14 mounted plow. How far do you run the rear wheel out? I used to help my dad adjust our 4020 wheels out, I just did as I was told. Didn't pay attention to what I was doing. I now wish I would of paid more attention.

Thanks

[Log in to Reply] [No Email]

F-I-T

11-23-2003 18:38:49

Report to Moderator

Re: setting wheels for plowing in reply to arnie1968, 11-23-2003 18:14:34

Arnie:

If you have an operator's manual for your 720, there is LOT in information in it on how to set up a plow.

Now, without re-typing too much from the manual which explains how you calculate the centerline of draft, etc, your 4-14" has a centerline of draft of 31 1/2", so from the hitchpoint of the drawbar (having it locked right on center is best), the inside of your furrow tire should be 31 1/2" from the drawbar hitchpoint.

So, if you have the drawbar pinned right in the middle of the darawbar support, measure 31 1/2" from the tractor centerline slot in the battery box to the inside surface of your right tire.

Frank

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy