Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Anyone here get Tractor Shop Magazine?

Welcome Guest, Log in or Register
Author 
G-MAN

11-20-2003 07:51:20




Report to Moderator

I just have to brag little bit. I wrote the article about buying 30-60 series JDs in the December issue, and I'd appreciate any feedback from those who read it. Anyway, I also wanted to comment on the other article in the same issue. There is a very well-written and factually correct article about the M-M G-1000 row-crop. The only thing I noticed that seemed a bit out of whack is that the author (a former M-M employee) compares it to the 4020 several times, citing the higher drawbar pull of the G-1000 and so forth. He never mentions that the 4020 gives up 20 horsepower, 100 cubic inches, and a bunch of weight to the G-1000. He cites the G-1000's superiority to "other tractors in it's class", when I think he's talking about tractors that aren't even in the same class with the G-1000. It seems to me that it should be compared to the 5020 row-crop, for a more accurate comparison. What do you guys think? Was the 4020 even in the same class as the G-1000? I know that Minnies in general, and the G-1000 in particular were very strong and rugged tractors, and were real workhorses, but I just thought the comparisons were a little off.

[Log in to Reply]   [No Email]
Steve - IN

11-21-2003 04:43:15




Report to Moderator
 Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 07:51:20  
G-Man,

You Nebraskans are quite the literary types on this website.

A guy can read you on tractors or read Ol' Rog Welsch's quips about most anything on a few other forums.

Guess we'll be in trouble when he starts knowing as much about tractors as you -- and your quips start to be as funny and sarcastic as his.

Congrats on getting published.



[Log in to Reply]  [No Email]
Platte River rat

11-21-2003 08:07:30




Report to Moderator
 Re: Re: Anyone here get Tractor Shop Magazine? in reply to Steve - IN, 11-21-2003 04:43:15  
most Nebraskans do not claim Roger Welsch as one of their own.



[Log in to Reply]  [No Email]
720Deere

11-20-2003 16:07:54




Report to Moderator
 Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 07:51:20  
I know it came along a little late, but the 4320 was still a new generation row crop. I don't know much about the MM G-1000, but 20 more hp than a 4020 sure sounds like a 4320 to me. I have spent quite a few hours on both 4020's and a 4320 and I can tell you the 4320 packs alot more wallop than the 4020. If they wanted to pick a fight with a Deere, it should have been someone closer to their size. I guess we all like to be a little bigger than those we are trying to compete with.

[Log in to Reply]  [No Email]
Dr.EVIL

11-22-2003 03:30:44




Report to Moderator
 Re: Re: Anyone here get Tractor Shop Magazine? in reply to 720Deere, 11-20-2003 16:07:54  
I agree, 4020-D Synchro-Range = 95 PTO HP; G-1000-D = 110 HP; 4320-D = 116 HP. Neighbor I worked for got a 4320 in spring of '69 didn't get rid of His 5-14 plow or 14 ft disk either. We just ran in 5th everywhere instead of 4th. most places. That 4320 had something like Three hours on it the first night I ran it. That was the ONLY time the A/C worked in the cab. Sure would have been a nice tractor for chopping hay if We could have kept the A/C working. He traded a pair of about '64 4020-D's (a NFE & WFE W/cab) for a NFE 4020-D side console & 4320 WFE W/cab, heater & A/C.

[Log in to Reply]  [No Email]
Bob

11-20-2003 15:27:28




Report to Moderator
 Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 07:51:20  
Had a picture of my 4030 in the October issue of Tractor Shop. A small article and picture inside back cover. Like the magazine. Hopefully it will get a little bigger as time goes on.



[Log in to Reply]  [No Email]
HA in Oh

11-20-2003 10:33:29




Report to Moderator
 Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 07:51:20  
I never heard of this mag. How can I get a copy of this article? I'm looking for 100hp cab JD.



[Log in to Reply]  [No Email]
Mike M

11-20-2003 09:54:53




Report to Moderator
 Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 07:51:20  
Who publishes this magazine ? And where do you find one ? As to the whats better ? I guess I'll let the sales record speak for me.



[Log in to Reply]  [No Email]
G-MAN

11-20-2003 10:42:27




Report to Moderator
 Re: Re: Anyone here get Tractor Shop Magazine? in reply to Mike M, 11-20-2003 09:54:53  
Tractor Shop is published by Hain Publishing, the same folks that put out Green Magazine. It was formerly know as Swap Meet. Now it's focusing more on 1960-1990 tractors. The website is www.tractorshop.com.



[Log in to Reply]  [No Email]
Dr.EVIL

11-20-2003 09:35:22




Report to Moderator
 Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 07:51:20  
Sorry, don't get the magazine, so haven't read your article. Neighbor's next door to the farm I grew up on bought a 4020-G NFE new in about 1965. Bought another farm a few miles away & needed more HP. G-1000-D WFE with the Vista kit came onto the farm. Still pulled the same 5-14's, 14 ft disc, 5-shank anhydrous applicator the 4020 did. Thing to remember about the G-1000 was that BIG 504 cid engine only turned 1800 RPM as opposed to the 2100 RPM to 2500 RPM deere turned the 4020's engine. I think the comparison between 4020 & G-1000 is valid. A 5010/5020 would compare with the G-1350 released a few years later with the M-M 585 CID engine. Topic of comparing the 4010/4020 to 560 & 806 came up on the red forum last week. I wonder what is correct to compare the 3010/3020 too? 460? 504? 656? or 706?

[Log in to Reply]  [No Email]
G-MAN

11-20-2003 10:40:31




Report to Moderator
 Re: Re: Anyone here get Tractor Shop Magazine? in reply to Dr.EVIL, 11-20-2003 09:35:22  
He made the point about the Minnie turning slower, but didn't mention the fact that it also has 100 more cubes, and therefore more low-end torque and is more suitable to running in that RPM range. The G-1350 with 585 CID would be 54 more cubes than the 5020 with 531 CID, so there's no way to really compare apples to apples. He also didn't say anything about respective fuel economy, although I think the 4020 would probably bury the M-M in that category, but maybe not. I just feel that the G-1000 was in a class of it's own, and the comparisons to the 4020 were a stretch. They also only sold less than 8000 of the Minnies, so there is absolutely no comparison in terms of popularity.

[Log in to Reply]  [No Email]
bent from SK

11-20-2003 08:24:52




Report to Moderator
 Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 07:51:20  
Your article on 30-60's was excellent. I am "dealing" on a 4430 and will have the article in my hand next time I inspect the unit. As far as the G1000 article is concerned, I have a '72 4620 that would be fun to compare to the big G. Okay, it is turbo/intercooled so lets bring out the 5020. Get real.



[Log in to Reply]  [No Email]
Sooner

11-20-2003 08:03:49




Report to Moderator
 Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 07:51:20  
Your article was excellent, there are some things in it I never would have thought of to look at.
The author of the G 1000 may have been comparing two companies largest row crop tractors in the mid 1960s. There was a point in time when the 5020 was only available as a standard. Though I can see your point as I also would put the G 1000 more in the category of the 5020 or Allis D 21.
I think that Tractor Shop magazine has potential if they can get a little more articles in it as I think lots of people grew up around tractors of the age they try to cover.

[Log in to Reply]  [No Email]
G-MAN

11-20-2003 10:44:23




Report to Moderator
 Re: Re: Anyone here get Tractor Shop Magazine? in reply to Sooner, 11-20-2003 08:03:49  
Yeah, I think it will end up being an excellent magazine. I know they need articles, and if they printed mine, they'll print anything, lol. I've been kicking around some ideas for some more, but they're going to be more oriented toward actual repair, such as rebuilding water pumps and so forth, so I have to wait until I get those kinds of jobs in the shops, so I can take pictures as I go.



[Log in to Reply]  [No Email]
Jay

11-20-2003 11:04:23




Report to Moderator
 Re: Re: Re: Anyone here get Tractor Shop Magazine? in reply to G-MAN, 11-20-2003 10:44:23  
Don't have my copy yet, but look forward to reading the article. How did you hear about them needing articles ? Mag is kinda thin, expected a little more content when I subscribed. Is it just that they need more articles to be submitted or what ?



[Log in to Reply]  [No Email]
G-MAN

11-20-2003 13:28:08




Report to Moderator
 Re: Re: Re: Re: Anyone here get Tractor Shop Magaz in reply to Jay, 11-20-2003 11:04:23  
I guess I was recommended to write something along those lines by someone involved with Green Magazine, and was contacted by Richard Hain. If you have article ideas, you should contact him. It probably wasn't even a month ago or so that I mailed it (I was supposed to have it done a long time ago), and it was already in the new issue. I was surprised to say the least. Like I said, you should get a hold of Richard and talk with him. I don't want to speak for someone else on a deal like that.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy