Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

John Deere MC Crawler- need info please-

Welcome Guest, Log in or Register
Author 
Dave

10-30-2000 15:31:39




Report to Moderator


I have just looked at an MC crawler, with blade, it runs nice, but is a little rough, was apparently used as a logging tractor for some time. Some of the rear flange of the motor is broken off where it covers the flaywheel, but it does not seem to affect the operation of the tractor. The tacks and rails are nice, and the steer clutches were recently replaced. The asking price is $3000 is this a fair price. Most of the tin is shot, but solid, just dented bad.

Thanks
Dave

[Log in to Reply]   [No Email]
craig m

10-31-2000 08:18:58




Report to Moderator
 Re: John Deere MC Crawler- need info please- in reply to Dave, 10-30-2000 15:31:39  
about 5 years ago I picked up a 52 MC with a blade on it for $300. The right steering clutch would not hold when I got into it there was a 1/4 bolt on one of fingers broke it cost me $.14 and to days of worke. I love it it is a neet tractor.



[Log in to Reply]  [No Email]
RonMC

10-30-2000 18:20:08




Report to Moderator
 Re: John Deere MC Crawler- need info please- in reply to Dave, 10-30-2000 15:31:39  
Dave, not sure of your location, but here in B.C., Canada, a machine as you describe , running and useable would go for around $2000 Canadian ($1600 US). I assume you already know they can be a money pit, but a lot of fun once they are done - not to mention useful. A local salvage yard owner has a 40C he wants to sell, all complete, needs some minor work, runs, has blade, all stock set-up, is asking $4500 US. The tin is good, needs minor body work to paint. If you want to check this one further, or if anyone else does, let me know. Ron

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy